Yamaha MT-09 2013-2015 rear brake hose
This HEL-Performance rear brake hose is the perfect choice for the Yamaha MT-09 2013-2015 motorcycle. The hose is designed to improve braking performance and withstand heavy use. The durable nylon coating protects the hose and maintains its performance even in the most demanding conditions.
The hoses are manufactured with meticulous attention to detail and 15 years of experience by a brake hose doctor at Porvoo. So you can rely on the craftsmanship of over 50,000 manufactured hoses with every braking action.
Model designation: RN29
Seal of approval: e13/0643
Note: when ordering this product you will receive factory-measured hoses. If you would like to create custom-measured hoses, you can do so hereIf you need help choosing the right hose, you can get a quick answer from the brake hose doctor in the chat.
Transparent
Carbon fiber
Black
White
Gold
Red
Orange
Yellow
Green
Blue
Yellow
Transparent purple
Trans.vis red
Translucent blue
35,72 €44,83 € VAT 0%VAT 25.5%
Varastossa
Log in or register as a customer to purchase this product.
Delivery only €9.49. Need help finding the right brake hose? Ask in the chat by clicking from here.
You may also need these
10,00 €12,55 € – 22,00 €27,61 € VAT 0%VAT 25.5%
Fabric-reinforced rubber and durable mortar hose for hard use. Perfectly suited for wet consumables.
21,65 €27,17 € VAT 0%VAT 25.5%
Steel claw connector y-branch. Very many useful and reliable connectors for various applications. By changing the seal, it is suitable for many different substances and temperatures. This connector makes it easy to distribute water, compressed air and steam lines. If choosing the right size and gasket causes difficulties, we will help you quickly in Chat or by phone. Material: Yellow passivated steel Seal: Buna N Seal type: GOER Nail gap: 42mm Temperature: -40° - +95 °C Norm: DIN 3489 Suitability: Compressed air, water, steam
2,60 €3,26 € – 12,00 €15,06 € VAT 0%VAT 25.5%
Steel claw connector with external thread. Very many useful and reliable connectors for various applications. By changing the seal, it is suitable for many different substances and temperatures. Thanks to the thread, it is easy to build various applications with the connector. If choosing the right size and gasket causes difficulties, we will help you quickly in Chat or by phone. Material: Yellow passivated steel Seal: Buna N Seal type: GOER Nail gap: 42mm Temperature: -40° - +95 °C Norm: DIN 3489 Suitability: Compressed air, water, steam
2,00 €2,51 € – 29,00 €36,40 € VAT 0%VAT 25.5%
The internal thread of the nail connector is a reliable and versatile connector for various applications in industry. It allows you to easily and quickly connect the hoses to each other or to other components. The steel nail connector has a yellow pass coating, which guarantees its durability and reliability. Applications The inner thread of the nail connector is perfectly suited for compressed air, water and steam. Industries The internal thread of the nail connector is a popular choice, especially in industry, where the reliable connection of hoses is key. Benefits The internal thread of the nail connector is easy to install and is very reliable. By changing the seal, it is suitable for many different substances and temperatures. Risks Choosing the wrong size or gasket can cause leaks or other problems. Therefore, it is important to choose the right size and seal. Chemical resistance The inner thread of the nail connector is made of steel, which is yellow passivated. It is resistant to a wide variety of chemicals. Operating temperatures The inner thread of the nail connector withstands temperatures between -40° and +95°C. Operating pressure classes The internal thread of the nail connector is classified according to the DIN 3489 standard. Certificates and classes The inner thread of the nail connector is manufactured in compliance with the DIN 3489 standard. If you need help choosing the right size and gasket, we will be happy to help you. Request a quote for the Nail connector internal thread product today!
6,00 €7,53 € VAT 0%VAT 25.5%
The claw connector cap is designed to provide a reliable and durable solution for industrial hose systems. It is made of high-quality materials that ensure excellent durability and longevity in demanding conditions. The compact design allows for easy installation and compatibility with a variety of connector types. This product is the ideal choice when looking for an efficient and reliable solution for handling and replacing hoses. Applications Industrial plants, power plants, chemical industry, oil refineries Industries Energy, chemicals, oil and gas, manufacturing Benefits The claw connector hat offers excellent durability and easy installation, reducing downtime and improving efficiency. Risks Improper installation can lead to leaks or a weakened connection, which highlights the importance of professional installation. Hoses Compatible with many industry standard fittings such as Camlock and Bauer. Chemical resistance The nail connector cap is designed to withstand multiple chemicals, making it an excellent choice for demanding environments. Operating temperatures -20 - +100°C Operating pressure classes 10 bar / 30 bar Certificates and classes ISO 9001, CE marking, ATEX approval
0,00 € VAT 0%VAT 25.5%
Hydraulic systems cone thread blind bsp plug with hex tightening. Steel and sturdy connector for all hydraulic systems. This nipple can be used to plug connectors, for example, in valve tables and other tight places. This connector series is the most common connector series used in hydraulics. This thread is also called R thread or pipe thread. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
These are the last things you viewed
10,00 €12,55 € – 22,00 €27,61 € VAT 0%VAT 25.5%
Fabric-reinforced rubber and durable mortar hose for hard use. Perfectly suited for wet consumables.
21,65 €27,17 € VAT 0%VAT 25.5%
Steel claw connector y-branch. Very many useful and reliable connectors for various applications. By changing the seal, it is suitable for many different substances and temperatures. This connector makes it easy to distribute water, compressed air and steam lines. If choosing the right size and gasket causes difficulties, we will help you quickly in Chat or by phone. Material: Yellow passivated steel Seal: Buna N Seal type: GOER Nail gap: 42mm Temperature: -40° - +95 °C Norm: DIN 3489 Suitability: Compressed air, water, steam
2,60 €3,26 € – 12,00 €15,06 € VAT 0%VAT 25.5%
Steel claw connector with external thread. Very many useful and reliable connectors for various applications. By changing the seal, it is suitable for many different substances and temperatures. Thanks to the thread, it is easy to build various applications with the connector. If choosing the right size and gasket causes difficulties, we will help you quickly in Chat or by phone. Material: Yellow passivated steel Seal: Buna N Seal type: GOER Nail gap: 42mm Temperature: -40° - +95 °C Norm: DIN 3489 Suitability: Compressed air, water, steam
2,00 €2,51 € – 29,00 €36,40 € VAT 0%VAT 25.5%
The internal thread of the nail connector is a reliable and versatile connector for various applications in industry. It allows you to easily and quickly connect the hoses to each other or to other components. The steel nail connector has a yellow pass coating, which guarantees its durability and reliability. Applications The inner thread of the nail connector is perfectly suited for compressed air, water and steam. Industries The internal thread of the nail connector is a popular choice, especially in industry, where the reliable connection of hoses is key. Benefits The internal thread of the nail connector is easy to install and is very reliable. By changing the seal, it is suitable for many different substances and temperatures. Risks Choosing the wrong size or gasket can cause leaks or other problems. Therefore, it is important to choose the right size and seal. Chemical resistance The inner thread of the nail connector is made of steel, which is yellow passivated. It is resistant to a wide variety of chemicals. Operating temperatures The inner thread of the nail connector withstands temperatures between -40° and +95°C. Operating pressure classes The internal thread of the nail connector is classified according to the DIN 3489 standard. Certificates and classes The inner thread of the nail connector is manufactured in compliance with the DIN 3489 standard. If you need help choosing the right size and gasket, we will be happy to help you. Request a quote for the Nail connector internal thread product today!
6,00 €7,53 € VAT 0%VAT 25.5%
The claw connector cap is designed to provide a reliable and durable solution for industrial hose systems. It is made of high-quality materials that ensure excellent durability and longevity in demanding conditions. The compact design allows for easy installation and compatibility with a variety of connector types. This product is the ideal choice when looking for an efficient and reliable solution for handling and replacing hoses. Applications Industrial plants, power plants, chemical industry, oil refineries Industries Energy, chemicals, oil and gas, manufacturing Benefits The claw connector hat offers excellent durability and easy installation, reducing downtime and improving efficiency. Risks Improper installation can lead to leaks or a weakened connection, which highlights the importance of professional installation. Hoses Compatible with many industry standard fittings such as Camlock and Bauer. Chemical resistance The nail connector cap is designed to withstand multiple chemicals, making it an excellent choice for demanding environments. Operating temperatures -20 - +100°C Operating pressure classes 10 bar / 30 bar Certificates and classes ISO 9001, CE marking, ATEX approval
0,00 € VAT 0%VAT 25.5%
Hydraulic systems cone thread blind bsp plug with hex tightening. Steel and sturdy connector for all hydraulic systems. This nipple can be used to plug connectors, for example, in valve tables and other tight places. This connector series is the most common connector series used in hydraulics. This thread is also called R thread or pipe thread. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.