Request an offer
A durable and stainless steel braided brake hose connector and hose that you may not find anywhere else.
1248,00 €1566,24 € VAT 0%VAT 25.5%
KRÄNZLE PROFI 195 TST 195BAR 230V 1400rpm
Request an offer
KRÄNZLE PROFI 175 TST 175BAR 400V 12L/MIN 1400rpm
1742,00 €2186,21 € VAT 0%VAT 25.5%
Profi-jet b 13/150 150bar / 13l/min honda gx160lx
16,00 €20,08 € - 23,00 €28,87 € VAT 0%VAT 25.5%
Pressure nozzle 25ast 1/6
1,00 €1,26 € - 11,00 €13,81 € VAT 0%VAT 25.5%
Orfs external thread plug for hydraulic systems. Steel and sturdy connector for all hydraulic systems. This internal thread plug can be used to plug a pressurized hydraulic system. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 228,00 €286,14 € VAT 0%VAT 25.5%
Ords t-branch for hydraulics that can be directed from the side. Steel and sturdy connector for all hydraulic systems. This t connector can be used to split the hydraulic line in two directions. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 19,20 €24,10 € VAT 0%VAT 25.5%
Hydraulic systems orfs reduction connector. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 17,00 €21,34 € VAT 0%VAT 25.5%
Hydraulic systems orfs internal thread cap. Steel and sturdy connector for all hydraulic systems. This can be used to close the pressurized hydraulic line. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 57,00 €71,54 € VAT 0%VAT 25.5%
Hydraulic systems orfs angle nipple external thread internal thread. Steel and sturdy connector for all hydraulic systems. This angle nipple can be used, for example, to align the hose. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 63,00 €79,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 34,00 €42,67 € VAT 0%VAT 25.5%
Orfs internal thread extension nipple for hydraulic systems. Steel and sturdy connector for all hydraulic systems. With this double nipple, hydraulic hoses can be extended or the external thread can be changed to an internal thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 114,00 €143,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple with inch thread. Steel and sturdy connector for all hydraulic systems. With this double nipple, you can start, for example, from a valve table, which usually has an inch thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
1,00 €1,26 € - 50,00 €62,75 € VAT 0%VAT 25.5%
Hose coupling pipe grip CES heavy series is designed to withstand demanding industrial conditions, providing a reliable solution for building hydraulic systems. The seamless connection of the coupling to DIN 2353 pipe fittings allows for strong and durable connections even in rigid pipes. The heavy-duty construction ensures longevity and excellent performance. DKOS sealing ensures perfect tightness and efficient operation. Applications Hydraulic systems, industrial piping, heavy machinery Industries Industry, mechanical engineering, energy sector Benefits Provides a reliable and long-lasting solution for demanding applications. Easily connects to DIN 2353 pipe fittings, ensuring versatility. Chemical and corrosion resistance Heavy-duty connectors are made of high-quality materials that are highly resistant to chemicals and corrosion. Sealing DIN 2353 DKOS series connectors seal against the mating part with their cone. Finding the right size By measuring the outer or inner diameter of the thread with a caliper, you can easily check the correct connector size using the thread table below.
99,00 €124,25 € - 139,00 €174,45 € VAT 0%VAT 25.5%
High pressure gun starlet short
1,00 €1,26 € - 16,00 €20,08 € VAT 0%VAT 25.5%
The DIN connector DKOL light series is designed to enhance the operation of hydraulic systems at a 45 degree angle. This connector provides a durable and leak-proof solution in combination with DIN 2353 pipe connectors, enabling the construction of high-quality hydraulic systems. The hose connector is ideally suited for use with hard hydraulic pipes, offering a wide range of different connector options. This reliable connector has been developed for professionals who demand the best performance and easy installation. Applications Hydraulic systems, industrial piping, machinery and equipment maintenance Industries Industry, engineering, construction, energy sector Benefits This connector improves system reliability and reduces installation time. Its versatility ensures compatibility with various piping configurations. Chemical and corrosion resistance The connector is designed to withstand harsh chemical and corrosive environments, extending its service life. Sealing The DIN 2353 light series connector only seals its cone against the body. Finding the right size By measuring the outer or inner diameter of the thread with a caliper, you can easily check the correct connector size using the thread table below.
