3,00 €3,77 € - 39,00 €48,95 € VAT 0%VAT 25.5%
The plastic protective spiral for hoses and cables is designed to provide effective protection against wear and mechanical damage. The easy-to-install and flexible spiral protects cables and hoses, extending their service life in demanding conditions. Its light weight and plastic construction make it an excellent choice for both indoor and outdoor use. The practical design allows the protective spiral to be used in a wide range of industrial applications. Applications Hydraulic systems, electrical cables, industrial automation Industries Construction industry, engineering industry, energy sector Benefits The protective spiral reduces the risk of wear on hoses and cables, which reduces maintenance costs and increases the reliability of the systems. Risks Improper installation or use can reduce the effectiveness of the protective spiral, which can lead to damage and downtime. Chemical resistance The protective spiral is resistant to most common chemicals, but it is recommended to check compatibility before use.
113,40 €142,32 € VAT 0%VAT 25.5%
Buy HEL Performance's exceptional braided brake hose for the Ultima GTR. These brake hoses are designed to replace the original rubber hoses, improve braking feel and increase durability even in demanding conditions. All parts of the hose set are manufactured and machined internally from stainless steel, ensuring quality and easy installation.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
66,00 €82,83 € VAT 0%VAT 25.5%
The 13 mm mold quick connector with tube set is a high-quality brass connector designed specifically for cooling molds on injection molding machines. This German-made connector offers efficient flow capacity and allows for easy one-handed connection, making it very practical in busy industrial environments. Its DN9 profile makes it a perfect fit for 13 mm tubes, and the durable material ensures a long service life. The connector is designed with both quality and reliability in mind. applications Mold cooling, injection molding machines, industrial cooling systems industries Plastics industry, manufacturing industry, engineering industry benefits The connector's ease of use and durable design reduce installation time and maintenance costs, while its excellent flow control improves cooling efficiency. chemical and corrosion resistance The brass construction offers good chemical resistance, and the stainless steel balls increase the connector's corrosion resistance. sealing FKM and PTFE seals
2,60 €3,26 € VAT 0%VAT 25.5%
The 13 mm connector to 10/8 mm adapter tube 500 mm is designed to provide a reliable and efficient solution for industrial needs. This adapter tube combines a 13 mm connector and a 10/8 mm hose, allowing for a seamless and tight connection. Made of durable material, it is excellent for demanding conditions. The compact 500 mm length makes it versatile and easy to install. Applications Mechanical engineering, chemical industry, food industry, automation systems Industries Industry, energy, agriculture, construction Benefits The intermediate pipe ensures an efficient and leak-free connection, reducing maintenance needs and improving system reliability. Chemical and corrosion resistance The material is highly resistant to various chemicals and corrosion, which extends the product's lifespan and reduces the need for replacement. Finding the right size By measuring the outer or inner diameter of the thread with a caliper, you can easily check the correct connector size using the thread table below.
3,59 €4,51 € - 3,80 €4,77 € VAT 0%VAT 25.5%
The quick-release male thread safety lock mold connector is designed to ensure safe and easy hose connections in the demanding environments of injection molding machines. This connector combines a durable construction with an innovative safety locking mechanism that prevents accidental loosening and minimizes the risk of leaks. The male thread connector is compatible with a wide range of industrial hoses, making it a versatile solution. High-quality material and precise manufacturing process ensure long service life and excellent performance. Applications Industrial liquid and gas transfer systems, hydraulic systems, chemical industry, injection molding industry. Industries Oil and gas industry, chemical industry, food industry, shipping Benefits The safety locking male thread of the quick-release formwork connector enables quick and safe installation, while reducing working time and maintenance costs. Chemical and corrosion resistance High-quality material and surface treatment ensure excellent resistance to both chemicals and corrosion, which extends the product's service life in demanding conditions. Sealing NBR seals, PTFE seals. The thread is sealed with tape, glue or directly to the hose. Finding the right size By measuring the outer or inner diameter of the thread with a caliper, you can easily check the correct connector size using the thread table below.
9,90 €12,42 € VAT 0%VAT 25.5%
The quick-release mold connector conversion 13mm body 9mm nipple allows you to easily change the size of the connector. The conversion connector is a very reliable and reliable product, designed specifically for mold cooling. This German-made female connector offers excellent flow, making it a very popular choice for injection molding machines. Applications Mold cooling, injection molding machines. The temperature resistance of the connector is +200°C. Industries Industry, especially the plastics industry. Benefits The connector's excellent flow and German quality guarantee reliability and longevity. Risks Improper use or maintenance may result in connector damage or leakage. Adapters Compatible with HASCO Z80/13, HASCO Z801/13, RECTUS 11, DYROS hoses. Chemical resistance The materials of the connector, such as brass and stainless steel, guarantee resistance against various chemicals.
0,00 € - 13,00 €16,32 € VAT 0%VAT 25.5%
Hose protection is an innovative solution that provides effective protection for hoses in industrial environments. Made of durable and flexible material, this hose protection protects hoses from abrasion, chemicals and temperature fluctuations. Its easy installation and versatility make it ideal for various industries where hose durability and protection are paramount. Using a hose protection sleeve improves the lifespan of hoses and reduces maintenance costs, making it a cost-effective choice. Applications Hydraulic systems, chemical transfer lines, industrial production lines, construction sites Industries Industry, construction, mining, chemical industry Benefits A hose protection sleeve extends the life of hoses and improves safety by reducing the risk of hose breakage. It also protects the environment from potential leaks. Risks Without the use of a protective sleeve, hoses are exposed to wear and environmental damage, which can lead to premature failure. This can cause significant downtime and additional costs. Chemical resistance The protective sock is specifically designed to withstand a range of chemicals used in industry, making it a reliable choice for challenging environments.
39,00 €48,95 € - 168,00 €210,84 € VAT 0%VAT 25.5%
The Storz connector reduction is the reliable choice of industrial professionals in the field of hose procurement, replacement and processing. This aluminum female threaded connector is designed to withstand demanding industrial conditions. Applications The Storz connector reduction is the ideal solution for a wide range of industrial needs, such as the procurement, replacement and handling of hoses. Industries The Storz connector reduction is particularly popular in industry, construction and logistics. Benefits The Storz connector reduction is a durable and reliable choice that extends the service life of the hoses and reduces the need for maintenance. Risks Using the wrong type of connector or careless installation can cause damage to the hose. That's why it's important to choose a high-quality and suitable connector, such as the Storz connector reduction. Hoses The Storz connector reducer is compatible with a wide variety of hoses, making it a versatile choice. Chemical resistance Made of aluminum, the Storz connector shrink is highly resistant to chemicals, which extends its service life. Operating temperatures The Storz connector reduction is designed to withstand a wide temperature range, for example -40 to +120 degrees. Operating pressure classes The Storz connector reduction is designed to withstand high pressures. An example of an operating pressure class could be 5 bar / 15 bar. Certificates and classes The Storz connector reduction meets the requirements of the SFS 4429 standard. Do you need a reliable and durable connector for industrial needs? Request a quote for Storz connector reduction today!
11,00 €13,81 € - 123,00 €154,37 € VAT 0%VAT 25.5%
Lockable aluminum storz connector with internal thread. 66mm nail spacing. Material: Aluminum Thread: Internal thread BSP Norm: SFS 4429
11,00 €13,81 € - 138,00 €173,19 € VAT 0%VAT 25.5%
Storz connector with external thread. Material: Aluminum Thread: Internal thread BSP Norm: SFS 4429
5,86 €7,35 € - 7,00 €8,79 € VAT 0%VAT 25.5%
Storz connector seal white for 133mm nail spacing..
19,72 €24,75 € - 196,00 €245,98 € VAT 0%VAT 25.5%
The Storz connector clamp spindle is a high-end hose connector designed to withstand the demanding conditions of industry. This aluminum connector is equipped with an NBR seal and a clamp spindle, providing reliability and longevity. Applications Industry, buildings, ships, agriculture. Industries Industry, construction, shipping, agriculture. Benefits The Storz connector clamp spindle offers excellent durability and reliability, reducing the need for maintenance and saving costs. Risks Misuse or poor maintenance can lead to connector damage and possible leaks. Proper use and maintenance is essential. Adapters Compatible with many different hoses. Chemical resistance The connector is made of aluminum, which is resistant to many chemicals. Operating temperatures -40 - +120 Operating pressure classes 5 bar / 15 bar Certificates and classes The product meets all industry standards. If you need a reliable and durable connector for industrial needs, the Storz connector clamp spindle is an excellent choice. Request a quote today.
10,00 €12,55 € - 135,00 €169,43 € VAT 0%VAT 25.5%
The Storz hose connector is a lockable aluminum connector designed especially for industrial needs. It is compatible with a wide variety of hoses, providing a reliable and durable solution for hose procurement and replacement. Applications The Storz hose connector is a versatile tool that is especially suitable for industry, construction sites, rescue services and fire departments. Industries Industry, construction industry, rescue service, fire department. Benefits The Storz hose connector is durable and reliable, which reduces the need for maintenance and replacement. Risks Improper use or maintenance can lead to damage to the connector, which is why proper use and maintenance is important. Adapters The Storz hose connector is compatible with many different hoses. Chemical resistance The Storz hose connector is made of aluminum, which is resistant to a wide range of chemicals. Operating temperatures -40 - +120 Operating pressure classes 5 bar / 15 bar Certificates and classes SFS 4429 If you need a reliable and durable solution for the purchase and replacement of hoses, the Storz hose connector is an excellent choice. Request a quote today!
51,87 €65,10 € - 78,00 €97,89 € VAT 0%VAT 25.5%
Storz connector with a short 4" spindle. A 3-part storz clamp was required for installation. Very suitable for connecting thin-walled hoses. Nail spacing 133mm.
51,43 €64,54 € VAT 0%VAT 25.5%
Storz connector clamp for short spindle.
57,71 €72,43 € VAT 0%VAT 25.5%
Storz connector clamp for short spindle.
26,00 €32,63 € VAT 0%VAT 25.5%
Storz connector clamp for short spindle.
16,00 €20,08 € - 23,00 €28,87 € VAT 0%VAT 25.5%
Pressure nozzle 25ast 1/6
8,03 €10,08 € - 11,00 €13,81 € VAT 0%VAT 25.5%
The 13mm mold quick connector body hose connector is designed for the demanding needs of the injection molding and plastics industries, providing a reliable and easy-to-use solution for managing hose connections. This connector allows for quick and safe connections, reducing downtime and increasing efficiency. Made from high-quality materials, it ensures excellent durability and longevity. The ideal choice when reliability and performance are required. Applications Injection molding machines, chemical pipelines, water distribution systems, compressed air lines Industries Chemical industry, food industry, engineering industry, water supply Benefits Quick installation and removal reduce downtime, high durability ensures a long service life. Chemical and corrosion resistance High-quality materials offer excellent resistance to chemicals and corrosion, ensuring a long service life even in demanding conditions.
