0,00 € - 17,35 €21,77 € VAT 0%VAT 25.5%
The AN aluminum valve is a stylish and durable solution, designed specifically for motorsport and tuning applications. The black aluminum finish not only provides an aesthetic appearance but also excellent corrosion resistance. This valve is the ideal choice when reliable flow control and durability in demanding conditions are required. Its easy installation and serviceability make it a popular choice among industry professionals. Applications Motorsports, tuning cars, fuel systems, fluid management systems Industries Automotive industry, racing, aerospace, marine and boating industry Benefits The durable aluminum construction ensures a long service life, and the valve's light weight makes handling and installation easy. Chemical and corrosion resistance The aluminum construction offers good protection against corrosion and is resistant to most industrial chemicals. Sealing Suitable for use with PTFE seals, which ensure a leak-free connection. Finding the right size By measuring the outer or inner diameter of the thread with a caliper, you can easily check the correct connector size using the thread table below.
113,40 €142,32 € VAT 0%VAT 25.5%
Buy HEL Performance's exceptional braided brake hose for the FSO Polonez 1.6D. These brake hoses are designed to replace the original rubber hoses, improve braking feel and increase durability even in demanding conditions. All parts of the hose set are manufactured and machined internally from stainless steel, ensuring quality and easy installation.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
113,40 €142,32 € VAT 0%VAT 25.5%
Buy HEL Performance's exceptional braided brake hose for the FSO Polonez 1.6 model. These brake hoses are designed to replace the original rubber hoses, improve braking feel and increase durability even in demanding conditions. All parts of the hose set are manufactured and machined internally from stainless steel, ensuring quality and easy installation.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
113,40 €142,32 € VAT 0%VAT 25.5%
Buy HEL Performance's exceptional braided brake hose for the FSO Polonez 1.5 model. These brake hoses are designed to replace the original rubber hoses, improve braking feel and increase durability even in demanding conditions. All parts of the hose set are manufactured and machined internally from stainless steel, ensuring quality and easy installation.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
113,40 €142,32 € VAT 0%VAT 25.5%
Buy HEL Performance's exceptional braided brake hose for the FSO 125P 1.5 Pickup. These brake hoses are designed to replace the original rubber hoses, improve braking feel and increase durability even in demanding conditions. All parts of the hose set are manufactured and machined internally from stainless steel, ensuring quality and easy installation.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
113,40 €142,32 € VAT 0%VAT 25.5%
Buy HEL Performance's exceptional braided brake hose for the FSO 125P 1.5 model. These brake hoses are designed to replace the original rubber hoses, improve braking feel and increase durability even in demanding conditions. All parts of the hose set are manufactured and machined internally from stainless steel, ensuring quality and easy installation.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
113,40 €142,32 € VAT 0%VAT 25.5%
Buy HEL Performance's exceptional braided brake hose for the FSO 125P 1.3 model. These brake hoses are designed to replace the original rubber hoses, improve braking feel and increase durability even in demanding conditions. All parts of the hose set are manufactured and machined internally from stainless steel, ensuring quality and easy installation.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
1,30 €1,63 € VAT 0%VAT 25.5%
Hydraulic pipe clamp plastic parts are an essential part of industrial piping installations, providing a reliable and durable solution for securing piping. These high-quality plastic parts are designed to withstand demanding conditions, such as high vibrations and chemical exposure. The innovative design allows for easy installation and versatile use in various industrial applications. In addition, the clamps are lightweight, yet highly durable, making them an economical choice. Applications Oil and gas industry, chemical industry, marine industry, mechanical engineering Industries Energy, transportation, manufacturing, construction Benefits Easy to install and significantly reduces installation time. Offers excellent vibration resistance and long-term reliability. Chemical and corrosion resistance Plastic parts are highly resistant to a wide range of chemicals and offer excellent corrosion resistance, making them ideal for challenging industrial environments.
Request an offer
Hydraulic pipe clamp plastic parts are an essential part of industrial piping installations, providing a reliable and durable solution for securing piping. These high-quality plastic parts are designed to withstand demanding conditions, such as high vibrations and chemical exposure. The innovative design allows for easy installation and versatile use in various industrial applications. In addition, the clamps are lightweight, yet highly durable, making them an economical choice. Applications Oil and gas industry, chemical industry, marine industry, mechanical engineering Industries Energy, transportation, manufacturing, construction Benefits Easy to install and significantly reduces installation time. Offers excellent vibration resistance and long-term reliability. Chemical and corrosion resistance Plastic parts are highly resistant to a wide range of chemicals and offer excellent corrosion resistance, making them ideal for challenging industrial environments.
39,45 €49,51 € VAT 0%VAT 25.5%
The HEL-Performance clutch hose offers a smooth and precise feel, making it an excellent choice for the Tema Motocross Enduro 2002- model. The hose's nylon coating ensures durability and protects it from wear, allowing it to maintain its performance for a long time.
The hoses are manufactured with meticulous attention to detail and 15 years of experience by a brake hose doctor at Porvoo. So you can rely on the craftsmanship of over 50,000 manufactured hoses with every braking action.
Model designation: - Seal of approval: - Layout: Note: When ordering this product you will receive factory-measured, fully assembled steel braided hoses. If you would like to create custom-measured hoses, you can do so. hereIf you need help choosing the right hose, you can get a quick answer from the brake hose doctor in the chat.
39,45 €49,51 € VAT 0%VAT 25.5%
The HEL-Performance front brake hose is specially designed for the Tema Motocross / Enduro 2002- model. This top quality hose offers excellent braking feel and durability in demanding conditions. The nylon coating ensures longevity and protects the hose from wear. Whether you are riding off-road or on the road, this hose provides confidence and precision in braking.
The hoses are manufactured with meticulous attention to detail and 15 years of experience by a brake hose doctor at Porvoo. So you can rely on the craftsmanship of over 50,000 manufactured hoses with every braking action.
Model designation: - Seal of approval: EBE Layout: Similar to the original Note: When ordering this product you will receive factory-measured, fully assembled steel braided hoses. If you would like to create custom-measured hoses, you can do so. hereIf you need help choosing the right hose, you can get a quick answer from the brake hose doctor in the chat.
1,30 €1,63 € VAT 0%VAT 25.5%
The hydraulic pipe clamp is designed to ensure a strong and secure connection of two pipes in industrial environments. This clamp includes a top plate as shown and a weldable washer that is attached to a metal surface, providing a durable solution for demanding conditions. The product's design allows for easy installation and ensures pipe stability. Our experts are ready to help you choose the right size or connector. Applications Industrial plants, hydraulic systems, machine shops, pipe installation Industries Maritime, construction industry, automotive industry, mechanical engineering Benefits The hydraulic pipe clamp offers excellent durability and reliability, reducing maintenance costs and extending the life of the system. Risks Incorrect installation or the wrong size bracket can lead to pipe movement and possible damage, highlighting the importance of choosing the right product. Hoses Compatible with various hydraulic connectors. Chemical resistance Good chemical resistance ensures the product's longevity in a wide range of industrial applications.
1,30 €1,63 € VAT 0%VAT 25.5%
The hydraulic pipe clamp for two pipes is designed to provide a stable and reliable fastening in demanding industrial environments. It consists of a top plate and a weldable washer, which together ensure a sturdy installation. The washer is attached to the metal surface on which the clamp is installed, ensuring a durable fastening. This product is the ideal choice when you want to ensure safe and efficient installation of pipes. Applications Industrial plants, machine shops, hydraulic systems, oil and gas applications Industries Industry, mechanical engineering, energy sector, maritime industry Benefits Provides a stable and secure attachment for two pipes, improving system reliability and reducing maintenance requirements. Risks If installed incorrectly, the bracket can reduce the stability of the pipes, which can lead to system malfunctions. It is important to ensure proper installation and fit. Chemical resistance The bracket is made of materials that are resistant to most industrial chemicals and oils.
Request an offer
The hydraulic pipe clamp for two pipes is designed to provide a stable and reliable fastening in demanding industrial environments. It consists of a top plate and a weldable washer, which together ensure a sturdy installation. The washer is attached to the metal surface on which the clamp is installed, ensuring a durable fastening. This product is the ideal choice when you want to ensure safe and efficient installation of pipes. Applications Industrial plants, machine shops, hydraulic systems, oil and gas applications Industries Industry, mechanical engineering, energy sector, maritime industry Benefits Provides a stable and secure attachment for two pipes, improving system reliability and reducing maintenance requirements. Risks If installed incorrectly, the bracket can reduce the stability of the pipes, which can lead to system malfunctions. It is important to ensure proper installation and fit. Chemical resistance The bracket is made of materials that are resistant to most industrial chemicals and oils.
6,50 €8,16 € - 133,00 €166,92 € VAT 0%VAT 25.5%
Chewing hose 0.7mm wall is a durable and transparent product, which is equipped with a metal spiral, which gives the hose additional strength and durability. Its wall thickness is 0.7 mm, and it offers good abrasion resistance and enables easy monitoring of liquid or air flow. Applications Chewing hose is designed for many different uses, including ventilation of industry, buildings and other premises and for transporting granular materials. It is also suitable as a hose for brush machines used in property maintenance, Industries Industry, construction, ventilation, cleaning. Benefits The chew hose offers excellent protection against fires and is highly resistant to oil and gasoline, making it useful for a wide variety of applications. Risks As a result of misuse or neglect of maintenance, the hose can become damaged or leak, emphasizing the importance of proper use and maintenance. Adapters The chewing hose is compatible with a wide variety of connectors, allowing it to be integrated into a wide variety of transfer systems. Chemical resistance The chew tube is designed to resist hydrolysis and microbes, making it a long-lasting choice. Operating temperatures The chewing hose has an operating temperature of -40 °C/+100 °C, so it is suitable for many different applications. Operating pressure classes The operating pressure class of the chewing hose is defined based on the use and explosion pressure class. Certificates and classes The chewing hose meets DIN 4102 B 1, ISO 8031 <109Ohm ja TRGS 727 <2,5108Ohm*m, ATEX 2014/34/EU ja DIN 26057 -standardit. Tutustu valikoimaamme ja pyydä tarjous jo tänään!
8,00 €10,04 € - 96,00 €120,48 € VAT 0%VAT 25.5%
Here is a Chewing Hose with a 1.0mm wall, designed especially for industrial needs. It is the perfect solution for suction and blowing applications of consumables, offering a durable and versatile alternative. Applications The chewing hose is ideal for transporting lighter goods such as sawdust, dust and flour, as well as coarser material such as pellets, wood chips and grain. Industries Industry, construction, agriculture, wood processing. Property maintenance brush machines. Benefits This hose is very durable and long-lasting, maintaining its flexibility in varying temperatures (-40...+90 °C). Risks Improper use or maintenance can lead to damage to the hose and shorten its service life. Adapters The chew tube is compatible with several different connectors. Hoses Compatible with many different hoses. Chemical resistance The chewing hose is made to withstand various chemicals, offering reliability and longevity. Operating temperatures -40 - +90 Operating pressure classes 5 bar / 15 bar Certificates and classes DNV-GL, Bureau Veritas (BV), American Bureau of Shipping (ABS), EN 1474-II, EN 12434, EN 1474-III. We offer comprehensive advice on the selection of hoses, ensuring that you get a solution that suits your needs. Request a quote for Chewing Hose with 1.0mm wall today! Resistance
3,90 €4,89 € - 72,00 €90,36 € VAT 0%VAT 25.5%
Chewing hose with a 0.6mm wall is a strong and durable choice for industrial needs. Its clear metal spiral reinforced construction makes it an ideal choice for transporting consumables and air. Applications Chemical industry, food industry, general industrial use. The transfer of grainy light materials and as an air conditioning hose. Industries Industry, chemical industry, food industry. Benefits The chew tube offers excellent resistance against wear and tear and its transparent structure allows you to follow the flow of liquid or air. Risks Improper use or maintenance can lead to hose damage and leaks. Chemical resistance The chewing hose is resistant to oil and gasoline, which increases its versatility. Operating temperatures -40 - +100 Operating pressure classes Information not available. Certificates and classes ISO 8031, TRGS 727, ATEX 2014/34/EU, BGI 739, DIN 26057. This chewing hose is designed to withstand the most demanding industrial conditions. Its reinforced structure and chemical resistance make it a reliable choice for a wide range of applications. Find out more and request an offer today!
6,00 €7,53 € - 167,00 €209,59 € VAT 0%VAT 25.5%
Chewing hose 0.4mm wall is an industrial credit product that offers durability, reinforcement with a metal spiral and transparency for a wide range of needs. This hose is also suitable as an air conditioning hose and its operating temperature range is -40°C to +100°C. Applications Chemical industry, food industry, general industrial use. Destinations where consumables such as sawdust, glass, dust are moved Industries Chemical industry, food industry, general industrial use. Benefits Chew hose 0.4mm wall offers excellent wear resistance and meets fire safety standards, which makes it a safe and durable choice. Risks Misuse or poor maintenance can have harmful effects on the durability and functionality of the hose. Chemical resistance The chewing tube with a 0.4mm wall is designed to withstand hydrolysis and microbes, which guarantees its longevity. Operating temperatures Maintains its flexibility even at low temperatures. Operating pressure classes Chewing hose with a 0.4mm wall is designed to withstand the demanding pressure and suction conditions of industry. Certificates and classes ISO 8031, TRGS 727, ATEX 2014/34/EU, BGI 739, DIN 26057. This chewing hose is designed to meet the exact requirements of industry. Its reinforced structure and transparency make it a reliable choice for many applications. Contact us and request a quote today!
0,00 € - 1,33 €1,67 € VAT 0%VAT 25.5%
Hydraulic pipe clamp plastic parts are an essential part of industrial piping installations, providing a reliable and durable solution for securing piping. These high-quality plastic parts are designed to withstand demanding conditions, such as high vibrations and chemical exposure. The innovative design allows for easy installation and versatile use in various industrial applications. In addition, the clamps are lightweight, yet highly durable, making them an economical choice. Applications Oil and gas industry, chemical industry, marine industry, mechanical engineering Industries Energy, transportation, manufacturing, construction Benefits Easy to install and significantly reduces installation time. Offers excellent vibration resistance and long-term reliability. Chemical and corrosion resistance Plastic parts are highly resistant to a wide range of chemicals and offer excellent corrosion resistance, making them ideal for challenging industrial environments.
2,94 €3,69 € - 165,00 €207,08 € VAT 0%VAT 25.5%
Air conditioning hose gray is an excellent choice for removing flue gases and steam in industrial environments. Its high-quality fiberglass construction and metal spiral reinforcement make it durable and long-lasting. Applications Removal of flue gases and steam, removal of air pollutants. Industries Industry, building, ventilation. Benefits The gray air conditioning hose is easy to install and its durable construction guarantees a long service life. Risks Improper installation or maintenance can lead to hose damage and ineffective operation. Adapters Compatible with many standard connectors. Chemical resistance The fiberglass construction and metal spiral reinforcement make the hose chemically resistant. Operating temperatures -40 - +120 Operating pressure classes 5 bar / 15 bar Certificates and classes NEN 6065/6066 1 3 DIN 4102 B2, DIN 4102 B2. Contact us to get a quote for Air conditioning hose, a gray, reliable and durable solution for removing flue gases and steam.
