39,45 €49,51 € VAT 0%VAT 25.5%
This HEL-Performance rear brake hose is the perfect choice for your CCM 404E 2003-2004 motorcycle. The hose is designed to improve braking performance and withstand heavy use. The durable nylon coating protects the hose and maintains its performance even in the most demanding conditions.
The hoses are manufactured with meticulous attention to detail and 15 years of experience by a brake hose doctor at Porvoo. So you can rely on the craftsmanship of over 50,000 manufactured hoses with every braking action.
Model designation: - Seal of approval: EBE Layout: Similar to the original Note: When ordering this product you will receive factory-measured, fully assembled steel braided hoses. If you would like to create custom-measured hoses, you can do so. hereIf you need help choosing the right hose, you can get a quick answer from the brake hose doctor in the chat.
39,45 €49,51 € VAT 0%VAT 25.5%
This HEL-Performance rear brake hose is the perfect choice for your CCM 644 Dual Sport 2003-2005 motorcycle. The hose is designed to improve braking performance and withstand heavy use. The durable nylon coating protects the hose and maintains its performance even in the most demanding conditions.
The hoses are manufactured with meticulous attention to detail and 15 years of experience by a brake hose doctor at Porvoo. So you can rely on the craftsmanship of over 50,000 manufactured hoses with every braking action.
Model designation: - Seal of approval: EBE Layout: Similar to the original Note: When ordering this product you will receive factory-measured, fully assembled steel braided hoses. If you would like to create custom-measured hoses, you can do so. hereIf you need help choosing the right hose, you can get a quick answer from the brake hose doctor in the chat.
39,45 €49,51 € VAT 0%VAT 25.5%
This HEL-Performance rear brake hose is the perfect choice for your CCM R30 2003-2005 motorcycle. The hose is designed to improve braking performance and withstand heavy use. The durable nylon coating protects the hose and maintains its performance even in the most demanding conditions.
The hoses are manufactured with meticulous attention to detail and 15 years of experience by a brake hose doctor at Porvoo. So you can rely on the craftsmanship of over 50,000 manufactured hoses with every braking action.
Model designation: - Seal of approval: EBE Layout: Similar to the original Note: When ordering this product you will receive factory-measured, fully assembled steel braided hoses. If you would like to create custom-measured hoses, you can do so. hereIf you need help choosing the right hose, you can get a quick answer from the brake hose doctor in the chat.
35,72 €44,83 € VAT 0%VAT 25.5%
The HEL-Performance front brake hose is designed specifically for the CCM 404E 2003-2004 model. This top quality hose offers excellent braking feel and durability in demanding conditions. The nylon coating ensures longevity and protects the hose from wear. Whether you are riding off-road or on the road, this hose provides confidence and precision in braking.
The hoses are manufactured with meticulous attention to detail and 15 years of experience by a brake hose doctor at Porvoo. So you can rely on the craftsmanship of over 50,000 manufactured hoses with every braking action.
Model designation: - Seal of approval: EBE Layout: Similar to the original Note: When ordering this product you will receive factory-measured, fully assembled steel braided hoses. If you would like to create custom-measured hoses, you can do so. hereIf you need help choosing the right hose, you can get a quick answer from the brake hose doctor in the chat.
35,72 €44,83 € VAT 0%VAT 25.5%
The HEL-Performance front brake hose is designed specifically for the CCM 644 Dual Sport 2003-2005 model. This top quality hose offers excellent braking feel and durability in demanding conditions. The nylon coating ensures longevity and protects the hose from wear. Whether you are riding off-road or on the road, this hose provides confidence and precision in braking.
The hoses are manufactured with meticulous attention to detail and 15 years of experience by a brake hose doctor at Porvoo. So you can rely on the craftsmanship of over 50,000 manufactured hoses with every braking action.
Model designation: - Seal of approval: EBE Layout: Similar to the original Note: When ordering this product you will receive factory-measured, fully assembled steel braided hoses. If you would like to create custom-measured hoses, you can do so. hereIf you need help choosing the right hose, you can get a quick answer from the brake hose doctor in the chat.
35,72 €44,83 € VAT 0%VAT 25.5%
The HEL-Performance front brake hose is designed specifically for the CCM R30 2003-2005 model. This top quality hose offers excellent braking feel and durability in demanding conditions. The nylon coating ensures longevity and protects the hose from wear. Whether you are riding off-road or on the road, this hose provides confidence and precision in braking.
The hoses are manufactured with meticulous attention to detail and 15 years of experience by a brake hose doctor at Porvoo. So you can rely on the craftsmanship of over 50,000 manufactured hoses with every braking action.
Model designation: - Seal of approval: EBE Layout: Similar to the original Note: When ordering this product you will receive factory-measured, fully assembled steel braided hoses. If you would like to create custom-measured hoses, you can do so. hereIf you need help choosing the right hose, you can get a quick answer from the brake hose doctor in the chat.
9,10 €11,42 € - 35,00 €43,93 € VAT 0%VAT 25.5%
Nitrogen hose 30 Bar is a really strong hose, designed to withstand high pressures and heavy wear. This hose is a universal hose for demanding applications, which is also suitable for compression joints. Applications Nitrogen hose in industry and ships. Industries Chemical industry, construction industry, metal industry, food industry, ships and ports. Benefits Nitrogen hose 30 Bar is very durable and reliable, and has a long service life. The hose is electrically conductive (R<106 Ω). Risks As a result of misuse or insufficient maintenance, hoses can be damaged and cause accidents. Adapters Compatible with many different connectors. Chemical resistance The product is designed to withstand many different chemicals, which makes it very versatile. Operating temperatures -40 - +110 Operating pressure classes 30 bar / 90 bar Certificates and classes UNI EN ISO 1307/97 If you are interested in purchasing the Nitrogen Hose 30 Bar product, please contact us and request an offer. Our experts are ready to help you find the right solution for your needs.
9,00 €11,30 € - 35,00 €43,93 € VAT 0%VAT 25.5%
Nitrogen hose 30 Bar is a really strong hose, designed to withstand high pressures and heavy wear. This hose is a universal hose for demanding applications, which is also suitable for compression joints. Applications Nitrogen hose in industry and ships. Industries Chemical industry, construction industry, metal industry, food industry, ships and ports. Benefits Nitrogen hose 30 Bar is very durable and reliable, and has a long service life. The hose is electrically conductive (R<106 Ω). Risks As a result of misuse or insufficient maintenance, hoses can be damaged and cause accidents. Adapters Compatible with many different connectors. Chemical resistance The product is designed to withstand many different chemicals, which makes it very versatile. Operating temperatures -40 - +110 Operating pressure classes 30 bar / 90 bar Certificates and classes UNI EN ISO 1307/97 If you are interested in purchasing the Nitrogen Hose 30 Bar product, please contact us and request an offer. Our experts are ready to help you find the right solution for your needs.
18,66 €23,42 € - 75,00 €94,13 € VAT 0%VAT 25.5%
Nitrogen hose heavy duty is an industrial multipurpose tool designed to withstand even the most demanding conditions. This yellow, nitrogen marked hose is very versatile and compatible with many fittings. Its working pressure is 20 bar. Applications Nitrogen hose heavy duty is perfectly suited for industrial needs, such as the transfer of nitrogen gas, the transport of air and water in heavy use. Industries Nitrogen hose heavy duty is designed especially for the needs of industry, such as the construction industry, chemical industry, power plants and other industries that use nitrogen gas. Benefits Nitrogen hose heavy duty is a durable and versatile hose that offers excellent chemical resistance and is suitable for use in a wide temperature range. Risks Improper use or maintenance can lead to hose damage or leaks. It is important to follow the instructions given by the expert on the correct use and maintenance of the hose. Adapters Nitrogen hose heavy duty is compatible with many different fittings, including clamps and clamps. Chemical resistance Nitrogen hose heavy duty is made of yellow EPDM rubber, which offers excellent chemical resistance. Operating temperatures Nitrogen hose heavy duty is designed for use in a wide temperature range -30 °C to +80 °C. Operating pressure classes Nitrogen hose heavy duty is designed to withstand high operating pressures. You can get more detailed information about operating pressure classes by contacting our expert. Certificates and classes Nitrogen hose heavy duty complies with international nitrogen hose regulations. You can get more detailed information about certificates and classes by contacting our expert. If you need more information or would like to request a quote for the Nitrogen hose heavy duty product, contact our expert.
4,99 €6,26 € - 5,00 €6,28 € VAT 0%VAT 25.5%
Nitrogen hose 20 Bar is a multipurpose industrial tool designed to withstand a pressure of up to 20 bar. The yellow hose marked with a stripe is made of high-quality EPDM material, which guarantees its longevity and reliability. Applications Nitrogen hose 20 Bar is excellently suitable as a nitrogen, air and water hose for heavy use. Industries The hose serves especially industrial sectors where the use of nitrogen, air or water hoses is common. Benefits Nitrogen hose 20 Bar offers a reliable and durable solution for industrial needs. Its versatility and high pressure resistance make it a valuable addition to the tool selection. hose conducting electricity <10⁶Ω, Risks As a result of misuse or neglect of maintenance, the hose can be damaged. Correct use and regular maintenance will extend the life of the hose and improve its performance. Adapters Nitrogen hose 20 Bar can be connected with clips or clamps. Chemical resistance A hose made of EPDM material is resistant to a wide variety of chemicals, which increases its possibilities of use. Operating temperatures Nitrogen hose 20 Bar withstands temperatures from -40 °C to +110 °C. Operating pressure classes The pressure resistance of the hose is 20 bar. Certificates and classes Nitrogen hose 20 Bar complies with international nitrogen hose regulations. Contact our expert to get more information about Nitrogen Hose 20 Bar or request a quote.
3700,00 €4643,50 € VAT 0%VAT 25.5%
High-quality rubber drain opening hose 120m 250bar for suction trucks and rolling stock. The hose is delivered as a ready-to-use assembly. Choose the size you want from the table below. You can also contact our expert sales.
2762,00 €3466,31 € VAT 0%VAT 25.5%
The rubber drain opening hose is a high-quality, durable and ready-to-use solution for the needs of suction trucks and mobile equipment. Its length is 120 meters and it can withstand a pressure of up to 250 bar. Applications Vacuum trucks, rolling stock, sewer opening. Industries Industry, construction, maintenance and service. Benefits The hose is long-lasting and durable, thanks to which it reduces the need for maintenance and replacements. Risks Improper use or maintenance can lead to hose damage and leaks. Adapters The hose is compatible with several different connectors. Chemical resistance The hose is made to withstand industrial chemicals, which guarantees its reliability and longevity. Operating temperatures -40 - +120 Operating pressure classes 5 bar / 15 bar Certificates and classes DNV-GL, Bureau Veritas (BV), American Bureau of Shipping (ABS), EN 1474-II, EN 12434, EN 1474-III. When you need a reliable and durable hose for drain opening, contact our experts. We offer comprehensive advice on the selection of hoses, ensuring that you get a solution that suits your needs.
1998,00 €2507,49 € VAT 0%VAT 25.5%
The rubber drain opening hose is a high-quality, durable and ready-to-use solution for the needs of suction trucks and mobile equipment. Its length is 120 meters and it can withstand a pressure of up to 250 bar. Applications Vacuum trucks, rolling stock, sewer opening. Industries Industry, construction, maintenance and service. Benefits The hose is long-lasting and durable, thanks to which it reduces the need for maintenance and replacements. Risks Improper use or maintenance can lead to hose damage and leaks. Adapters The hose is compatible with several different connectors. Chemical resistance The hose is made to withstand industrial chemicals, which guarantees its reliability and longevity. Operating temperatures -40 - +120 Operating pressure classes 5 bar / 15 bar Certificates and classes DNV-GL, Bureau Veritas (BV), American Bureau of Shipping (ABS), EN 1474-II, EN 12434, EN 1474-III. When you need a reliable and durable hose for drain opening, contact our experts. We offer comprehensive advice on the selection of hoses, ensuring that you get a solution that suits your needs.
1495,00 €1876,23 € VAT 0%VAT 25.5%
The rubber drain opening hose is a high-quality, durable and ready-to-use solution for the needs of suction trucks and mobile equipment. Its length is 120 meters and it can withstand a pressure of up to 250 bar. Applications Vacuum trucks, rolling stock, sewer opening. Industries Industry, construction, maintenance and service. Benefits The hose is long-lasting and durable, thanks to which it reduces the need for maintenance and replacements. Risks Improper use or maintenance can lead to hose damage and leaks. Adapters The hose is compatible with several different connectors. Chemical resistance The hose is made to withstand industrial chemicals, which guarantees its reliability and longevity. Operating temperatures -40 - +120 Operating pressure classes 5 bar / 15 bar Certificates and classes DNV-GL, Bureau Veritas (BV), American Bureau of Shipping (ABS), EN 1474-II, EN 12434, EN 1474-III. When you need a reliable and durable hose for drain opening, contact our experts. We offer comprehensive advice on the selection of hoses, ensuring that you get a solution that suits your needs.
210,00 €263,55 € - 1948,00 €2444,74 € VAT 0%VAT 25.5%
The sewer opening hose 1" for suction trucks is a high-quality and durable solution for industrial needs. This 200 bar pressure-resistant hose is specially designed for use in suction trucks and mobile equipment, and is delivered as a ready-to-use assembly. Applications Vacuum trucks, mobile equipment, sewer openings and sewer flushing. Industries Industry, construction, sewerage, environmental services, petrochemicals. Benefits Our hose offers high performance and durability, reducing the need for maintenance and replacement. This hose is delivered practically by the meter. Tell us the length and we'll squeeze the ends into it. The plastic hose has a very slippery surface and is easy to handle. Risks Improper use or maintenance can lead to hose damage and leaks, emphasizing the importance of proper use and maintenance. Adapters Compatible with several standard connectors, allowing integration into a wide range of systems. Chemical resistance Made to withstand extreme conditions, providing reliability and longevity. Operating temperatures -40 - +120 Operating pressure classes The working pressure of the hose is 200 bar and the explosion pressure is 510 bar. If you need a reliable and durable sewer opening hose of specific dimensions, contact our experts. We offer comprehensive advice on the selection of hoses, ensuring that you get a solution that suits your needs.
150,00 €188,25 € - 1125,00 €1411,88 € VAT 0%VAT 25.5%
The drain opening hose 1/2" for suction trucks is a high-quality and durable choice for industrial needs. This 220 bar plastic drain opening hose is designed especially for use in suction trucks and mobile equipment. It has a slippery surface and is easily wound on a reel. The hose is delivered as a ready-to-use assembly, and you can choose the desired length from the table below . Applications Vacuum trucks, mobile equipment, drain opening and drain flushing. Industries Industry, sewer opening services, maintenance. Benefits The sewer opening hose 1/2" for suction trucks offers reliability and durability, reducing the need for maintenance and replacement. Risks Improper use or maintenance can lead to hose damage and leaks, emphasizing the importance of proper use and maintenance. Adapters Compatible with many standard connectors, allowing versatile use. Chemical resistance The hose is made to withstand industrial chemicals, providing reliability and longevity. Operating temperatures -40 - +120 Operating pressure classes Working pressure 240 bar and explosion pressure 550 bar. Contact our expert sales for more information or to request a quote.
1,65 €2,07 € - 11,00 €13,81 € VAT 0%VAT 25.5%
Spiral hose compression sleeve for hydraulics. Strong sleeve for crimping spiral hose connectors. Follow the manufacturer's instructions for compression, and always interpret the spiral hose connection. No peeling before pressing: EN 856 4SP, SAE 100 R12, EN 856 4SH, ISO 18752-CC – SAE 100 R15
3,00 €3,77 € - 6,50 €8,16 € VAT 0%VAT 25.5%
Crimp Teflon hose hst compression sleeve. Strong acid-resistant sleeve for compression of basic hydraulics hose connectors. Follow the manufacturer's instructions for compression, and always interpret the hose connection connection.
3,08 €3,87 € - 9,75 €12,24 € VAT 0%VAT 25.5%
Crimp Teflon hose hst compression sleeve. Strong acid-resistant sleeve for compression of basic hydraulics hose connectors. Follow the manufacturer's instructions for compression, and always interpret the hose connection connection.
0,00 € - 3,00 €3,77 € VAT 0%VAT 25.5%
The sheet metal sleeve for hose is designed to ensure the reliability and durability of hose connections in low-pressure applications. Made of galvanized steel, the sleeve offers excellent corrosion resistance, making it an ideal choice for demanding industrial environments. Installation is quick and easy, but requires a separate pressing device, such as a hand press or hydraulic press. The sheet metal sleeve is especially popular in fuel lines, where a more secure connection than a clamp is required. Applications Fuel lines, hydraulic systems, low pressure hoses Industries Automotive industry, chemical industry, oil and gas industry Benefits The metal sleeve provides a reliable connection that improves safety and reduces the risk of leaks. Its galvanized steel construction ensures a long service life even in demanding conditions. Risks Installation requires the right type of crimping tool, which can be challenging without the right equipment. Improper installation can lead to joint deterioration and leaks. Hoses Compatible with most hoses. Chemical resistance Galvanized steel is highly resistant to most industrial chemicals, but is not recommended for use in strongly acidic environments. Operating temperatures -40 - +120°C Operating pressure classes 6bar / 18bar
