3,00 €3,77 € - 39,00 €48,95 € VAT 0%VAT 25.5%
The plastic protective spiral for hoses and cables is designed to provide effective protection against wear and mechanical damage. The easy-to-install and flexible spiral protects cables and hoses, extending their service life in demanding conditions. Its light weight and plastic construction make it an excellent choice for both indoor and outdoor use. The practical design allows the protective spiral to be used in a wide range of industrial applications. Applications Hydraulic systems, electrical cables, industrial automation Industries Construction industry, engineering industry, energy sector Benefits The protective spiral reduces the risk of wear on hoses and cables, which reduces maintenance costs and increases the reliability of the systems. Risks Improper installation or use can reduce the effectiveness of the protective spiral, which can lead to damage and downtime. Chemical resistance The protective spiral is resistant to most common chemicals, but it is recommended to check compatibility before use.
157,50 €197,66 € VAT 0%VAT 25.5%
Buy HEL Performance's exceptional braided brake hose for the MEV EXOCET Non-ABS model. These brake hoses are designed to replace the original rubber hoses, improve braking feel and increase durability even in demanding conditions. All parts of the hose kit are manufactured and machined internally from stainless steel, ensuring quality and easy installation.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are prone to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 5 hoses, so for only 157.5 euros you are guaranteed to get value for your money.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are prone to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 5 hoses, so for only 157.5 euros you are guaranteed to get value for your money.
157,50 €197,66 € VAT 0%VAT 25.5%
Buy HEL Performance's exceptional braided brake hose for the MEV EXOCET ABS model. These brake hoses are designed to replace the original rubber hoses, improve braking feel and increase durability even in demanding conditions. All parts of the hose set are manufactured and machined internally from stainless steel, ensuring quality and easy installation.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are prone to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 5 hoses, so for only 157.5 euros you are guaranteed to get value for your money.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are prone to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 5 hoses, so for only 157.5 euros you are guaranteed to get value for your money.
0,00 € - 13,00 €16,32 € VAT 0%VAT 25.5%
Hose protection is an innovative solution that provides effective protection for hoses in industrial environments. Made of durable and flexible material, this hose protection protects hoses from abrasion, chemicals and temperature fluctuations. Its easy installation and versatility make it ideal for various industries where hose durability and protection are paramount. Using a hose protection sleeve improves the lifespan of hoses and reduces maintenance costs, making it a cost-effective choice. Applications Hydraulic systems, chemical transfer lines, industrial production lines, construction sites Industries Industry, construction, mining, chemical industry Benefits A hose protection sleeve extends the life of hoses and improves safety by reducing the risk of hose breakage. It also protects the environment from potential leaks. Risks Without the use of a protective sleeve, hoses are exposed to wear and environmental damage, which can lead to premature failure. This can cause significant downtime and additional costs. Chemical resistance The protective sock is specifically designed to withstand a range of chemicals used in industry, making it a reliable choice for challenging environments.
0,01 €0,01 € - 4,00 €5,02 € VAT 0%VAT 25.5%
The aluminum washer is a durable and high-quality component that is ideal for the demanding needs of industry. Made from high-quality aluminum, this washer provides a reliable and long-lasting solution, especially with bearings and seals. Available in a variety of sizes, aluminum washers offer versatility and flexibility for a variety of applications. Designed for industrial professionals, the product guarantees excellent performance and easy installation. Applications bearings, seals, industrial assemblies Industries manufacturing industry, mechanical engineering, oil and gas industry Benefits Aluminum washers offer excellent wear resistance and a lightweight construction, making them easy to handle and install. They are also corrosion resistant, increasing their service life in demanding environments. Risks The softness of aluminum may limit the use of washers in high-load applications. It is important to ensure that the size and type of washer are appropriate for the application. Chemical and corrosion resistance Aluminum washers are highly resistant to corrosion, but strong acids or bases can cause damage in the long term. Operating temperatures -50 - +150 Operating pressure classes 10 bar / 30 bar Certificates and classes ISO 9001, ISO 14001
1,00 €1,26 € - 7,00 €8,79 € VAT 0%VAT 25.5%
The threaded reducing fitting is a versatile and durable solution for industrial applications where a reduced thread is required. Made from high-quality brass, this fitting is ideal for handling compressed air, water and fuels. Its design allows for easy installation and reliable use in demanding conditions. This makes it an ideal choice for industrial professionals looking for an efficient and long-lasting fitting. Applications Compressed air, water, fuels Industries Industry, marine industry, engineering industry Benefits The threaded reduction fitting offers a reliable seal and a durable construction that reduces maintenance requirements. It is designed for long service life. Risks If installed incorrectly, the connector can cause leaks or pressure loss. It is important to ensure that the connector is installed correctly and is suitable for the application being used. Hoses Compatible with various compressed air and fuel hoses Chemical resistance The brass construction offers good resistance to many chemicals, but it is recommended to check compatibility individually. Operating temperatures -20 - +120°C Operating pressure classes 10bar / 25bar Certificates and classes No certificates mentioned
1,30 €1,63 € - 3,00 €3,77 € VAT 0%VAT 25.5%
The threaded coupling is a premium low-pressure coupling with inch threads, designed specifically for industrial applications. Its durable material makes it an excellent choice for handling compressed air, fuels and water. This versatile coupling provides a reliable connection that can withstand even the most demanding conditions. The threaded coupling is easy to install and guarantees long-lasting performance. Applications Compressed air, fuels, water Industries Industry, engineering workshops, energy industry Benefits The threaded coupling provides a reliable connection and durable performance in a variety of industrial applications. It is easy to install and requires little maintenance. Risks If installed incorrectly, a threaded sleeve can cause leaks and reduce the functionality of the system. It is important to ensure proper installation and regular inspection. Hoses Compatible with most standard threaded hoses Chemical resistance The threaded sleeve is highly resistant to most common industrial chemicals, making it a versatile solution. Operating temperatures -20 - +80°C Operating pressure classes 6bar / 18bar Certificates and classes No specific certifications or classes mentioned
16,00 €20,08 € - 23,00 €28,87 € VAT 0%VAT 25.5%
Pressure nozzle 25ast 1/6
1,00 €1,26 € - 6,00 €7,53 € VAT 0%VAT 25.5%
The threaded coupling is a premium low-pressure coupling with inch threads, designed specifically for industrial applications. Its durable material makes it an excellent choice for handling compressed air, fuels and water. This versatile coupling provides a reliable connection that can withstand even the most demanding conditions. The threaded coupling is easy to install and guarantees long-lasting performance. Applications Compressed air, fuels, water Industries Industry, engineering workshops, energy industry Benefits The threaded coupling provides a reliable connection and durable performance in a variety of industrial applications. It is easy to install and requires little maintenance. Risks If installed incorrectly, a threaded sleeve can cause leaks and reduce the functionality of the system. It is important to ensure proper installation and regular inspection. Hoses Compatible with most standard threaded hoses Chemical resistance The threaded sleeve is highly resistant to most common industrial chemicals, making it a versatile solution. Operating temperatures -20 - +80°C Operating pressure classes 6bar / 18bar Certificates and classes No specific certifications or classes mentioned
22,00 €27,61 € - 108,00 €135,54 € VAT 0%VAT 25.5%
Black heat shrink tubing with adhesive is a strong and reliable solution for industrial needs, offering excellent adhesion and a 3:1 shrink ratio. This product is specifically designed to protect machinery and equipment and seal wire and cable joints. Its versatility makes it an ideal choice for a variety of industrial applications. The durable and long-lasting heat shrink tubing reduces the need for maintenance and repairs, making it a cost-effective choice. Applications Protecting machines and equipment, sealing wire and cable joints. Industries Electrical and electronics industry, automotive industry, construction and renovation industry. Benefits Excellent adhesion and durability, reducing the need for maintenance and repairs. Risks Improper use or maintenance can lead to premature wear or damage to the product. It is important to follow the correct operating and maintenance instructions. Chemical resistance Made to withstand a wide range of chemicals, extending the product's lifespan and versatility. Certificates and classes The product meets all industry requirements and standards.
0,01 €0,01 € - 69,00 €86,60 € VAT 0%VAT 25.5%
• VLBS is forged from strong CrNiMo steel. • Simple and quick to weld. • High dynamic and static strength. • 100% distortion checked. • The welding piece is forged from the very weldable material S355J2+N (Fe52C) and equipped with a marking indicating the maximum load. The patented distance knobs create the air gap needed for welding. • Important: Thanks to the special seam (through-welded), it meets the requirements of DIN 18800. The root portion should be continuously welded. In this way, the root is corrosion-free. • The headset can be used outdoors. • Protected spring keeps the handle in the desired position and silent
0,01 €0,01 € VAT 0%VAT 25.5%
Weldable lifting eye 3.2 ton. • Replaces flame-cut plate lugs • Can be loaded in all directions • Safety factor 4:1 • Rejuvenated and hardened, therefore very wear-resistant • Patented wear marks inside and outside • Rotating small weld
