Log in / Register tilataksesi verkkokaupasta.

Hoses

Adapters

1,00 1,26  - 11,00 13,81  VAT 0%VAT 25.5%

Orfs external thread plug for hydraulic systems. Steel and sturdy connector for all hydraulic systems. This internal thread plug can be used to plug a pressurized hydraulic system. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.

0,00  - 228,00 286,14  VAT 0%VAT 25.5%

Ords t-branch for hydraulics that can be directed from the side. Steel and sturdy connector for all hydraulic systems. This t connector can be used to split the hydraulic line in two directions. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.

0,00  - 19,20 24,10  VAT 0%VAT 25.5%

Hydraulic systems orfs reduction connector. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.

2,00 2,51  - 17,00 21,34  VAT 0%VAT 25.5%

Hydraulic systems orfs internal thread cap. Steel and sturdy connector for all hydraulic systems. This can be used to close the pressurized hydraulic line. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.

0,00  - 57,00 71,54  VAT 0%VAT 25.5%

Hydraulic systems orfs angle nipple external thread internal thread. Steel and sturdy connector for all hydraulic systems. This angle nipple can be used, for example, to align the hose. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.

0,00  - 63,00 79,07  VAT 0%VAT 25.5%

Hydraulic systems orfs external thread double nipple. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.

0,00  - 34,00 42,67  VAT 0%VAT 25.5%

Orfs internal thread extension nipple for hydraulic systems. Steel and sturdy connector for all hydraulic systems. With this double nipple, hydraulic hoses can be extended or the external thread can be changed to an internal thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.

2,00 2,51  - 114,00 143,07  VAT 0%VAT 25.5%

Hydraulic systems orfs external thread double nipple with inch thread. Steel and sturdy connector for all hydraulic systems. With this double nipple, you can start, for example, from a valve table, which usually has an inch thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.

5,91 7,42  - 9,97 12,51  VAT 0%VAT 25.5%

Hydraulic hex plug with M10 threads.

0,01 0,01  - 16,00 20,08  VAT 0%VAT 25.5%

The 1/2" socket is specifically designed for nutrunners, offering excellent durability and performance for industrial needs. This socket is made of high-quality materials that ensure long service life and reliability. Its precise dimensions and durable construction make it an ideal choice for demanding work environments. The 1/2" socket is compatible with a wide range of tools, increasing its versatility. Applications Nut drivers, industrial installation work, machine shop maintenance tasks, heavy equipment maintenance Industries Industry, engineering, automotive, construction Benefits The 1/2" socket offers a reliable and efficient solution for handling nuts, improving work efficiency and reducing downtime. Risks Using the wrong socket can lead to damage to nuts or tools, highlighting the importance of choosing the right product. Hoses Compatible with many standard nut drivers