0,00 € - 16,07 €20,17 € VAT 0%VAT 25.5%
Jic basic fitting bsp male thread offers a reliable and durable solution for industrial needs. This high-quality fitting is specifically designed for applications with BSP male threads where a precise and tight connection is required. Its robust construction ensures longevity and easy installation in a variety of environments. Jic basic fitting is ideal for a wide range of industrial applications where corrosion resistance and reliability are primary requirements. Applications Hydraulic systems, compressed air lines, industrial piping Industries Engineering industry, construction industry, shipping Benefits Jic basic connector bsp male thread offers excellent tightness and durability, reducing the risk of leaks and extending the life of the system. Chemical and corrosion resistance The connector material is highly resistant to chemical agents and corrosion, ensuring reliable operation in challenging conditions. Sealing BSP/R is sealed with a USIT sealing ring to the plane. JIC is sealed to the mating piece by a JIC cone. Finding the right size By measuring the outer or inner diameter of the thread with a caliper, you can easily check the correct connector size using the thread table below.
99,00 €124,25 € VAT 0%VAT 25.5%
We manufacture and test cement and mortar hoses as ready-made installations. You always get the hose assembly you need with the right connectors, so changing is quick and easy and using the hose is safe. Leave a request for a quote on the adjacent form and we will contact you quickly to map out the overall need. Above all, remember to mention the length and size of the hose.
0,00 € - 37,65 €47,25 € VAT 0%VAT 25.5%
Metal-reinforced and very durable cement hose for pumping concrete. Perfectly suited for wet consumables.
10,00 €12,55 € - 22,00 €27,61 € VAT 0%VAT 25.5%
Fabric-reinforced rubber and durable mortar hose for hard use. Perfectly suited for wet consumables.
81,61 €102,42 € VAT 0%VAT 25.5%
Top-quality acid-resistant rubber-protected washing valve with female internal thread used in food washing. The valve takes into account the high flow rates and temperature required for washing. Thanks to the rubber protection, it does not rattle the floor and is durable.
24,10 €30,25 € VAT 0%VAT 25.5%
A high-quality female washing quick connector with an external thread used in food washing. Thanks to the rubber protection, this connector does not rattle on the floor and is really durable. In addition, high-quality heat-resistant Vito seals are used in the connector. Size: 1/2" / 17.8 mm Working pressure: 250 bar Thread 1: 1/2" Material: AISI316 Profile: 3100 Operating temperature max: +150°c Pipe flow: 50l/min
22,67 €28,45 € VAT 0%VAT 25.5%
An acid-resistant female quick connector with an external thread used in food washing, where you can find heat-resistant and high-quality Vito seals. Would you like a quote for this product? Ask in the chat or request via the offer button. Size: 1/2" / 17.8 mm Working pressure: 250 bar Thread 1: 1/2" Material: AISI 316 Profile: 3100 Operating temperature max: +150°c Pipe flow 50l/min
22,67 €28,45 € VAT 0%VAT 25.5%
High-quality and durable acid-resistant quick connector female with internal thread used in food washing. Heat-resistant, high-quality Vito seals in the connector. If you have questions about the choice of connector, or you want an offer for this product, you can contact our hose masters in the chat. Size: 1/2" / 17.8 mm Working pressure: 250 bar Thread 1: 1/2" Material: AISI 316 Profile: 3100 Operating temperature max: +150°c Pipe flow: 50l/min
15,56 €19,53 € VAT 0%VAT 25.5%
Acid-resistant quick connector with male external thread used in food washing, where you can find high-quality heat-resistant Vito seals. Would you like an offer for a larger batch of this product? Ask for an offer and you will get an answer quickly. Size: 1/2" / 17.8 mm Working pressure: 250 bar Thread 1: 1/2" Material: AISI 316 Profile: 3100 Operating temperature max: +150°c Pipe flow: 50l/min
15,56 €19,53 € VAT 0%VAT 25.5%
Top-quality acid-resistant quick connector with male internal thread used in food washing. Heat-resistant Vito seals in the connector, which are high-quality and durable. Size: 1/2" / 17.8 mm Working pressure: 250 bar Thread 1: 1/2" Material: AISI 316 Profile: 3100 Operating temperature max: +150°c Pipe flow: 50l/min
Request an offer
Metal-reinforced and very durable cement hose for pumping concrete. Perfectly suited for wet consumables.
1,00 €1,26 € - 11,00 €13,81 € VAT 0%VAT 25.5%
Orfs external thread plug for hydraulic systems. Steel and sturdy connector for all hydraulic systems. This internal thread plug can be used to plug a pressurized hydraulic system. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 228,00 €286,14 € VAT 0%VAT 25.5%
Ords t-branch for hydraulics that can be directed from the side. Steel and sturdy connector for all hydraulic systems. This t connector can be used to split the hydraulic line in two directions. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 19,20 €24,10 € VAT 0%VAT 25.5%
Hydraulic systems orfs reduction connector. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 17,00 €21,34 € VAT 0%VAT 25.5%
Hydraulic systems orfs internal thread cap. Steel and sturdy connector for all hydraulic systems. This can be used to close the pressurized hydraulic line. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 57,00 €71,54 € VAT 0%VAT 25.5%
Hydraulic systems orfs angle nipple external thread internal thread. Steel and sturdy connector for all hydraulic systems. This angle nipple can be used, for example, to align the hose. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 63,00 €79,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 34,00 €42,67 € VAT 0%VAT 25.5%
Orfs internal thread extension nipple for hydraulic systems. Steel and sturdy connector for all hydraulic systems. With this double nipple, hydraulic hoses can be extended or the external thread can be changed to an internal thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 114,00 €143,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple with inch thread. Steel and sturdy connector for all hydraulic systems. With this double nipple, you can start, for example, from a valve table, which usually has an inch thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
3,90 €4,89 € VAT 0%VAT 25.5%
Hydraulic system bsp/jic sleeve with internal threads. Steel and sturdy connector for all hydraulic systems. This connector has unf jic internal threads on one end with jic sealing. With this connector, you can easily raise the joints in the valve table or extend the hose or change the thread series of the connector. Due to its structure, the connector is easy to thread. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone.
