0,00 € - 16,07 €20,17 € VAT 0%VAT 25.5%
Jic basic fitting bsp male thread offers a reliable and durable solution for industrial needs. This high-quality fitting is specifically designed for applications with BSP male threads where a precise and tight connection is required. Its robust construction ensures longevity and easy installation in a variety of environments. Jic basic fitting is ideal for a wide range of industrial applications where corrosion resistance and reliability are primary requirements. Applications Hydraulic systems, compressed air lines, industrial piping Industries Engineering industry, construction industry, shipping Benefits Jic basic connector bsp male thread offers excellent tightness and durability, reducing the risk of leaks and extending the life of the system. Chemical and corrosion resistance The connector material is highly resistant to chemical agents and corrosion, ensuring reliable operation in challenging conditions. Sealing BSP/R is sealed with a USIT sealing ring to the plane. JIC is sealed to the mating piece by a JIC cone. Finding the right size By measuring the outer or inner diameter of the thread with a caliper, you can easily check the correct connector size using the thread table below.
99,00 €124,25 € VAT 0%VAT 25.5%
We manufacture and test cement and mortar hoses as ready-made installations. You always get the hose assembly you need with the right connectors, so changing is quick and easy and using the hose is safe. Leave a request for a quote on the adjacent form and we will contact you quickly to map out the overall need. Above all, remember to mention the length and size of the hose.
0,00 € - 37,65 €47,25 € VAT 0%VAT 25.5%
Metal-reinforced and very durable cement hose for pumping concrete. Perfectly suited for wet consumables.
10,00 €12,55 € - 22,00 €27,61 € VAT 0%VAT 25.5%
Fabric-reinforced rubber and durable mortar hose for hard use. Perfectly suited for wet consumables.
Request an offer
Metal-reinforced and very durable cement hose for pumping concrete. Perfectly suited for wet consumables.
1,00 €1,26 € - 11,00 €13,81 € VAT 0%VAT 25.5%
Orfs external thread plug for hydraulic systems. Steel and sturdy connector for all hydraulic systems. This internal thread plug can be used to plug a pressurized hydraulic system. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 228,00 €286,14 € VAT 0%VAT 25.5%
Ords t-branch for hydraulics that can be directed from the side. Steel and sturdy connector for all hydraulic systems. This t connector can be used to split the hydraulic line in two directions. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 19,20 €24,10 € VAT 0%VAT 25.5%
Hydraulic systems orfs reduction connector. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 17,00 €21,34 € VAT 0%VAT 25.5%
Hydraulic systems orfs internal thread cap. Steel and sturdy connector for all hydraulic systems. This can be used to close the pressurized hydraulic line. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 57,00 €71,54 € VAT 0%VAT 25.5%
Hydraulic systems orfs angle nipple external thread internal thread. Steel and sturdy connector for all hydraulic systems. This angle nipple can be used, for example, to align the hose. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 63,00 €79,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 34,00 €42,67 € VAT 0%VAT 25.5%
Orfs internal thread extension nipple for hydraulic systems. Steel and sturdy connector for all hydraulic systems. With this double nipple, hydraulic hoses can be extended or the external thread can be changed to an internal thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 114,00 €143,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple with inch thread. Steel and sturdy connector for all hydraulic systems. With this double nipple, you can start, for example, from a valve table, which usually has an inch thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
3,90 €4,89 € VAT 0%VAT 25.5%
Hydraulic system bsp/jic sleeve with internal threads. Steel and sturdy connector for all hydraulic systems. This connector has unf jic internal threads on one end with jic sealing. With this connector, you can easily raise the joints in the valve table or extend the hose or change the thread series of the connector. Due to its structure, the connector is easy to thread. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone.
12,00 €15,06 € - 26,00 €32,63 € VAT 0%VAT 25.5%
Piston seal 32x24x15 is designed specifically for double-acting cylinders, providing a high-quality replacement seal for hydraulic cylinders. Piston rod seals should be replaced whenever you doubt the performance of the cylinder. When replacing the seal, it is recommended to also replace the cylinder rod wiper and the O-ring on the cylinder head. We offer expert assistance in choosing the right seal. Applications Hydraulic cylinder spare part seal. Industries Industry, logistics, construction, earthmoving. Benefits The cylinder piston seal improves hydraulic cylinder performance and reduces leaks, extending the life of the equipment and reducing the need for maintenance. Risks An incorrectly selected or installed seal can cause cylinder malfunctions and increase maintenance costs. Regular inspection and proper selection are essential to maintain performance. Chemical resistance The cylinder piston seal is designed to withstand various hydraulic oils. Inner dimension: 24mm Outer dimension: 32mm Height: 15mm
4,97 €6,24 € - 40,00 €50,20 € VAT 0%VAT 25.5%
Hydraulic system bsp/jic sleeve with internal threads. Steel and sturdy connector for all hydraulic systems. This connector has unf jic internal threads on one end with jic sealing. With this connector, you can easily raise the joints in the valve table or extend the hose or change the thread series of the connector. Due to its structure, the connector is easy to thread. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone.
0,00 € - 86,00 €107,93 € VAT 0%VAT 25.5%
JIC t-connector with external threads for hydraulic systems. Steel and sturdy connector for all hydraulic systems. These connectors have a UNF thread with a JIC seal. Due to its structure, the connector is easy to thread. This connector can be used, for example, to divide hydraulic lines from e.g. hoses. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone.
0,00 € - 171,00 €214,61 € VAT 0%VAT 25.5%
JIC t-connector for hydraulic systems with external threads, with an internal thread on the side. Steel and sturdy connector for all hydraulic systems. These connectors have a UNF thread with a JIC seal. Due to its structure, the connector is easy to thread. This connector can be used, for example, to divide hydraulic lines from e.g. hoses. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone.
0,00 € - 86,00 €107,93 € VAT 0%VAT 25.5%
The directional JIC fitting with BSP thread is a robust and versatile solution for hydraulic systems where directional and sealing are key. This steel elbow fitting conveniently combines a UNF male thread and a JIC male thread, allowing for precise angle orientations while ensuring excellent sealing. Available in a variety of sizes, it is suitable for a wide range of industrial applications. Installation of this fitting is quick and easy, making it an ideal choice for busy work environments. Applications Hydraulic systems, angle design, pressure controls Industries Industry, shipping, construction, engineering Benefits The connector offers easy installation and versatility, reducing installation time and improving system efficiency. Chemical and corrosion resistance The steel construction ensures good resistance to chemicals and corrosion, which extends the connector's service life in challenging conditions. Sealing BSP thread with flat sealing. Finding the right size By measuring the outer or inner diameter of the thread with a caliper, you can easily check the correct connector size using the thread table below.
1,30 €1,63 € - 34,00 €42,67 € VAT 0%VAT 25.5%
The JIC male thread plug is designed specifically for the needs of hydraulic systems and is made of durable steel. This connector is easy to install on the thread, making it an excellent choice for blinding pressurized hydraulic lines. Available in a variety of sizes, the JIC male thread plug offers versatility for industrial applications. Our expert team is ready to help you select the right size. Applications Blinding of hydraulic lines, control of pressurized systems, industrial hydraulic applications Industries Industry, mechanical engineering, hydraulic systems Benefits The JIC male thread plug is easy to install and provides a durable solution for controlling pressurized systems. Several different size options increase the versatility of the product. Chemical and corrosion resistance Thanks to its steel construction, the connector is highly resistant to various chemicals and corrosion, which extends its service life in demanding conditions. Sealing The connector seals from its cone to a female JIC thread. Finding the right size By measuring the outer or inner diameter of the thread with a caliper, you can easily check the correct connector size using the thread table below.
