39,45 €49,51 € VAT 0%VAT 25.5%
This HEL-Performance rear brake hose is the perfect choice for your Montesa 315R Trials 2001-2004 motorcycle. The hose is designed to improve braking performance and withstand heavy use. The durable nylon coating protects the hose and maintains its performance even in the most demanding conditions.
The hoses are manufactured with meticulous attention to detail and 15 years of experience by a brake hose doctor at Porvoo. So you can rely on the craftsmanship of over 50,000 manufactured hoses with every braking action.
Model designation: - Seal of approval: EBE Layout: Similar to the original Note: When ordering this product you will receive factory-measured, fully assembled steel braided hoses. If you would like to create custom-measured hoses, you can do so. hereIf you need help choosing the right hose, you can get a quick answer from the brake hose doctor in the chat.
39,45 €49,51 € VAT 0%VAT 25.5%
The HEL-Performance clutch hose offers a smooth and precise feel, making it an excellent choice for the Montesa 315R Trials 2001-2004 model. The nylon coating of the hose ensures durability and protects it from wear, allowing it to maintain its performance for a long time.
The hoses are manufactured with meticulous attention to detail and 15 years of experience by a brake hose doctor at Porvoo. So you can rely on the craftsmanship of over 50,000 manufactured hoses with every braking action.
Model designation: - Seal of approval: - Layout: Note: When ordering this product you will receive factory-measured, fully assembled steel braided hoses. If you would like to create custom-measured hoses, you can do so. hereIf you need help choosing the right hose, you can get a quick answer from the brake hose doctor in the chat.
39,45 €49,51 € VAT 0%VAT 25.5%
The HEL-Performance front brake hose is specially designed for the Montesa 315R Trials 2001-2004 model. This top quality hose offers excellent braking feel and durability in demanding conditions. The nylon coating ensures longevity and protects the hose from wear. Whether you are riding off-road or on the road, this hose provides confidence and precision in braking.
The hoses are manufactured with meticulous attention to detail and 15 years of experience by a brake hose doctor at Porvoo. So you can rely on the craftsmanship of over 50,000 manufactured hoses with every braking action.
Model designation: - Seal of approval: EBE Layout: Similar to the original Note: When ordering this product you will receive factory-measured, fully assembled steel braided hoses. If you would like to create custom-measured hoses, you can do so. hereIf you need help choosing the right hose, you can get a quick answer from the brake hose doctor in the chat.
0,01 €0,01 € - 51,00 €64,01 € VAT 0%VAT 25.5%
Top quality acid-resistant pressure gauge with a 63mm face plate.
0,00 € - 25,00 €31,38 € VAT 0%VAT 25.5%
Top quality acid-resistant pressure gauge with a 63mm face plate.
94,00 €117,97 € - 158,00 €198,29 € VAT 0%VAT 25.5%
The 100mm pressure gauge is a high-quality acid-resistant measuring device, especially suitable for the demanding needs of industry. Its 100 mm face allows for clear readability even in challenging conditions. This pressure gauge is designed to withstand extreme chemical environments and provide accurate measurement results. Its durable construction ensures reliability and a long service life. Applications Process industry, chemical industry, oil and gas industry, food industry Industries Industry, energy, manufacturing, environmental engineering Benefits The 100mm pressure gauge provides accurate measurement results and withstands demanding conditions, making it a reliable choice for industrial environments. Risks Incorrectly selected materials or incorrect operating temperature can lead to premature wear of the pressure gauge or incorrect measurement results. Chemical resistance The pressure gauge is designed to withstand harsh chemical environments, making it an ideal choice for a variety of industries. Operating temperatures -40- +90°C Operating pressure classes 10 bar / 160 bar
1,00 €1,26 € - 11,00 €13,81 € VAT 0%VAT 25.5%
Orfs external thread plug for hydraulic systems. Steel and sturdy connector for all hydraulic systems. This internal thread plug can be used to plug a pressurized hydraulic system. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 228,00 €286,14 € VAT 0%VAT 25.5%
Ords t-branch for hydraulics that can be directed from the side. Steel and sturdy connector for all hydraulic systems. This t connector can be used to split the hydraulic line in two directions. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 19,20 €24,10 € VAT 0%VAT 25.5%
Hydraulic systems orfs reduction connector. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 17,00 €21,34 € VAT 0%VAT 25.5%
Hydraulic systems orfs internal thread cap. Steel and sturdy connector for all hydraulic systems. This can be used to close the pressurized hydraulic line. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 57,00 €71,54 € VAT 0%VAT 25.5%
Hydraulic systems orfs angle nipple external thread internal thread. Steel and sturdy connector for all hydraulic systems. This angle nipple can be used, for example, to align the hose. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 63,00 €79,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 34,00 €42,67 € VAT 0%VAT 25.5%
Orfs internal thread extension nipple for hydraulic systems. Steel and sturdy connector for all hydraulic systems. With this double nipple, hydraulic hoses can be extended or the external thread can be changed to an internal thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 114,00 €143,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple with inch thread. Steel and sturdy connector for all hydraulic systems. With this double nipple, you can start, for example, from a valve table, which usually has an inch thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
3,00 €3,77 € - 23,00 €28,87 € VAT 0%VAT 25.5%
Twistable hose connector for 1/4" hydraulic hose.
