Log in / Register tilataksesi verkkokaupasta.

Hoses

Adapters

15,60 19,58  - 195,00 244,73  VAT 0%VAT 25.5%

Galvanized Loose flange for making various connections. If necessary, remember to order a hose reel for the flange. Our customer service helps you choose the right flange in chat, e-mail and by phone.

40,00 50,20  - 138,00 173,19  VAT 0%VAT 25.5%

Safety hook automatic with locking for lifting 1.4 ton.

0,01 0,01  VAT 0%VAT 25.5%

Latch hook to be welded 2.5 ton.

0,01 0,01  VAT 0%VAT 25.5%

Latch hook class 12

4,78 6,00  - 23,00 28,87  VAT 0%VAT 25.5%

• Safety factor: 6 x nominal load • Standard: EN 13889 • Hot-dip galvanized • Operating temperature: -40°C – +200°C

0,01 0,01  - 30,00 37,65  VAT 0%VAT 25.5%

Gear lock belt for fastening 2000/4000dan.

24,00 30,12  - 73,85 92,68  VAT 0%VAT 25.5%

comply with the requirements of EN 1492-2

0,01 0,01  - 58,00 72,79  VAT 0%VAT 25.5%

High-quality and durable impact connector between chain and components.

30,03 37,69  - 78,00 97,89  VAT 0%VAT 25.5%

• Thanks to the design of the bottom of the hook, there is no need to reduce the load capacity of the chain. • Extended hook tip prevents mistakes. • The design of the cleat protects against accidental detachment. • Meets the requirements of prEN1677-7. • Connecting pin and safety pin pre-installed

10,21 12,81  - 226,00 283,63  VAT 0%VAT 25.5%

Flange connector steel spindle 100mm PN10/16

211,00 264,81  VAT 0%VAT 25.5%

Flange connector ss spindle 100mm PN10/16

64,00 80,32  - 274,95 345,06  VAT 0%VAT 25.5%

Advantages of the joker hook • easy to install, no tools required • the hook can be used to grab the lifting eye or extend the rope • increases the possibilities of using artificial fiber ropes • sturdy locking hook

69,66 87,42  - 320,00 401,60  VAT 0%VAT 25.5%

Loose flange SS. The outer diameter of the flange is 200 mm and the inner hole is 160 mm. 8 bolt holes in the flange.

29,55 37,09  VAT 0%VAT 25.5%

Loose flange AISI 304. Flange outer diameter 105 mm and inner hole 75 mm. 4 bolt holes in the flange.

0,01 0,01  - 69,00 86,60  VAT 0%VAT 25.5%

• VLBS is forged from strong CrNiMo steel. • Simple and quick to weld. • High dynamic and static strength. • 100% distortion checked. • The welding piece is forged from the very weldable material S355J2+N (Fe52C) and equipped with a marking indicating the maximum load. The patented distance knobs create the air gap needed for welding. • Important: Thanks to the special seam (through-welded), it meets the requirements of DIN 18800. The root portion should be continuously welded. In this way, the root is corrosion-free. • The headset can be used outdoors. • Protected spring keeps the handle in the desired position and silent

0,01 0,01  VAT 0%VAT 25.5%

Weldable lifting eye 3.2 ton. • Replaces flame-cut plate lugs • Can be loaded in all directions • Safety factor 4:1 • Rejuvenated and hardened, therefore very wear-resistant • Patented wear marks inside and outside • Rotating small weld