40,00 €50,20 € - 138,00 €173,19 € VAT 0%VAT 25.5%
Safety hook automatic with locking for lifting 1.4 ton.
4,78 €6,00 € - 23,00 €28,87 € VAT 0%VAT 25.5%
• Safety factor: 6 x nominal load • Standard: EN 13889 • Hot-dip galvanized • Operating temperature: -40°C – +200°C
0,01 €0,01 € - 30,00 €37,65 € VAT 0%VAT 25.5%
Gear lock belt for fastening 2000/4000dan.
24,00 €30,12 € - 73,85 €92,68 € VAT 0%VAT 25.5%
comply with the requirements of EN 1492-2
1,00 €1,26 € - 198,00 €248,49 € VAT 0%VAT 25.5%
The brass hose connector with external thread is designed to provide a reliable and durable solution for industrial needs. Made from high-quality nickel-plated brass, this connector is ideal for handling compressed air, water and fuels. The straight-threaded design allows for easy and tight installation, and it is recommended to use tape, glue or hemp in the joints to ensure a tight seal. This connector is an ideal choice for industrial professionals looking for a durable and versatile connector. Applications Compressed air, water, fuels Industries Industry, construction, energy sector Benefits Durable and corrosion-resistant material ensures long-lasting use. Easy installation thanks to the straight-threaded design. Chemical and corrosion resistance Nickel-plated brass offers excellent resistance to a variety of industrial chemicals and corrosion. Sealing Recommended sealing methods: tape, glue, hemp Finding the right size By measuring the outer or inner diameter of the thread with a caliper, you can easily check the correct connector size using the thread table below.
0,01 €0,01 € - 58,00 €72,79 € VAT 0%VAT 25.5%
High-quality and durable impact connector between chain and components.
30,03 €37,69 € - 78,00 €97,89 € VAT 0%VAT 25.5%
• Thanks to the design of the bottom of the hook, there is no need to reduce the load capacity of the chain. • Extended hook tip prevents mistakes. • The design of the cleat protects against accidental detachment. • Meets the requirements of prEN1677-7. • Connecting pin and safety pin pre-installed
2,73 €3,43 € - 13,00 €16,32 € VAT 0%VAT 25.5%
Hose connector with mm thread is designed to provide a reliable and durable solution for industrial needs. Made of high-quality brass, this connector is ideal for various hose connections and ensures a tight and safe connection. Easy installation and versatility make it an ideal choice for industrial professionals who value efficiency and reliability. When installing the connector, it is recommended to use tape, glue or hemp to ensure a perfect seal. Applications Industrial piping, hydraulic systems, compressed air lines, water supply systems Industries Mechanical engineering, chemical industry, food industry, construction industry Benefits Brass hose connector offers excellent corrosion resistance and long service life. It is easy to install and maintain, saving time and cost. Risks The tightness of the hose connection may deteriorate over time if proper sealing materials are not used during installation. This can lead to leaks and reduced system performance. Hoses Compatible hoses include PVC hoses, rubber hoses and polyurethane hoses. Chemical resistance Brass is highly resistant to most industrial chemicals, but it is worth checking compatibility, especially with aggressive substances. Operating temperatures -20 to +80°C Operating pressure classes 6bar / 18bar
5,91 €7,42 € - 9,97 €12,51 € VAT 0%VAT 25.5%
Hydraulic hex plug with M10 threads.
64,00 €80,32 € - 274,95 €345,06 € VAT 0%VAT 25.5%
Advantages of the joker hook • easy to install, no tools required • the hook can be used to grab the lifting eye or extend the rope • increases the possibilities of using artificial fiber ropes • sturdy locking hook
0,01 €0,01 € - 69,00 €86,60 € VAT 0%VAT 25.5%
• VLBS is forged from strong CrNiMo steel. • Simple and quick to weld. • High dynamic and static strength. • 100% distortion checked. • The welding piece is forged from the very weldable material S355J2+N (Fe52C) and equipped with a marking indicating the maximum load. The patented distance knobs create the air gap needed for welding. • Important: Thanks to the special seam (through-welded), it meets the requirements of DIN 18800. The root portion should be continuously welded. In this way, the root is corrosion-free. • The headset can be used outdoors. • Protected spring keeps the handle in the desired position and silent
0,01 €0,01 € VAT 0%VAT 25.5%
Weldable lifting eye 3.2 ton. • Replaces flame-cut plate lugs • Can be loaded in all directions • Safety factor 4:1 • Rejuvenated and hardened, therefore very wear-resistant • Patented wear marks inside and outside • Rotating small weld
