0,01 €0,01 € - 4,00 €5,02 € VAT 0%VAT 25.5%
The aluminum washer is a durable and high-quality component that is ideal for the demanding needs of industry. Made from high-quality aluminum, this washer provides a reliable and long-lasting solution, especially with bearings and seals. Available in a variety of sizes, aluminum washers offer versatility and flexibility for a variety of applications. Designed for industrial professionals, the product guarantees excellent performance and easy installation. Applications bearings, seals, industrial assemblies Industries manufacturing industry, mechanical engineering, oil and gas industry Benefits Aluminum washers offer excellent wear resistance and a lightweight construction, making them easy to handle and install. They are also corrosion resistant, increasing their service life in demanding environments. Risks The softness of aluminum may limit the use of washers in high-load applications. It is important to ensure that the size and type of washer are appropriate for the application. Chemical and corrosion resistance Aluminum washers are highly resistant to corrosion, but strong acids or bases can cause damage in the long term. Operating temperatures -50 - +150 Operating pressure classes 10 bar / 30 bar Certificates and classes ISO 9001, ISO 14001
1,00 €1,26 € - 7,00 €8,79 € VAT 0%VAT 25.5%
The threaded reducing fitting is a versatile and durable solution for industrial applications where a reduced thread is required. Made from high-quality brass, this fitting is ideal for handling compressed air, water and fuels. Its design allows for easy installation and reliable use in demanding conditions. This makes it an ideal choice for industrial professionals looking for an efficient and long-lasting fitting. Applications Compressed air, water, fuels Industries Industry, marine industry, engineering industry Benefits The threaded reduction fitting offers a reliable seal and a durable construction that reduces maintenance requirements. It is designed for long service life. Risks If installed incorrectly, the connector can cause leaks or pressure loss. It is important to ensure that the connector is installed correctly and is suitable for the application being used. Hoses Compatible with various compressed air and fuel hoses Chemical resistance The brass construction offers good resistance to many chemicals, but it is recommended to check compatibility individually. Operating temperatures -20 - +120°C Operating pressure classes 10bar / 25bar Certificates and classes No certificates mentioned
1,30 €1,63 € - 3,00 €3,77 € VAT 0%VAT 25.5%
The threaded coupling is a premium low-pressure coupling with inch threads, designed specifically for industrial applications. Its durable material makes it an excellent choice for handling compressed air, fuels and water. This versatile coupling provides a reliable connection that can withstand even the most demanding conditions. The threaded coupling is easy to install and guarantees long-lasting performance. Applications Compressed air, fuels, water Industries Industry, engineering workshops, energy industry Benefits The threaded coupling provides a reliable connection and durable performance in a variety of industrial applications. It is easy to install and requires little maintenance. Risks If installed incorrectly, a threaded sleeve can cause leaks and reduce the functionality of the system. It is important to ensure proper installation and regular inspection. Hoses Compatible with most standard threaded hoses Chemical resistance The threaded sleeve is highly resistant to most common industrial chemicals, making it a versatile solution. Operating temperatures -20 - +80°C Operating pressure classes 6bar / 18bar Certificates and classes No specific certifications or classes mentioned
0,00 € - 154,44 €193,82 € VAT 0%VAT 25.5%
Strong hydraulic 3-way ball valve. The valve is rated for hydraulic pressures and oil. Not suitable for water due to rusting. Drilling in valve L. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone.
1,00 €1,26 € - 11,00 €13,81 € VAT 0%VAT 25.5%
Orfs external thread plug for hydraulic systems. Steel and sturdy connector for all hydraulic systems. This internal thread plug can be used to plug a pressurized hydraulic system. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 228,00 €286,14 € VAT 0%VAT 25.5%
Ords t-branch for hydraulics that can be directed from the side. Steel and sturdy connector for all hydraulic systems. This t connector can be used to split the hydraulic line in two directions. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 19,20 €24,10 € VAT 0%VAT 25.5%
Hydraulic systems orfs reduction connector. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 17,00 €21,34 € VAT 0%VAT 25.5%
Hydraulic systems orfs internal thread cap. Steel and sturdy connector for all hydraulic systems. This can be used to close the pressurized hydraulic line. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 57,00 €71,54 € VAT 0%VAT 25.5%
Hydraulic systems orfs angle nipple external thread internal thread. Steel and sturdy connector for all hydraulic systems. This angle nipple can be used, for example, to align the hose. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 63,00 €79,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 34,00 €42,67 € VAT 0%VAT 25.5%
Orfs internal thread extension nipple for hydraulic systems. Steel and sturdy connector for all hydraulic systems. With this double nipple, hydraulic hoses can be extended or the external thread can be changed to an internal thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 114,00 €143,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple with inch thread. Steel and sturdy connector for all hydraulic systems. With this double nipple, you can start, for example, from a valve table, which usually has an inch thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
1,00 €1,26 € - 6,00 €7,53 € VAT 0%VAT 25.5%
The threaded coupling is a premium low-pressure coupling with inch threads, designed specifically for industrial applications. Its durable material makes it an excellent choice for handling compressed air, fuels and water. This versatile coupling provides a reliable connection that can withstand even the most demanding conditions. The threaded coupling is easy to install and guarantees long-lasting performance. Applications Compressed air, fuels, water Industries Industry, engineering workshops, energy industry Benefits The threaded coupling provides a reliable connection and durable performance in a variety of industrial applications. It is easy to install and requires little maintenance. Risks If installed incorrectly, a threaded sleeve can cause leaks and reduce the functionality of the system. It is important to ensure proper installation and regular inspection. Hoses Compatible with most standard threaded hoses Chemical resistance The threaded sleeve is highly resistant to most common industrial chemicals, making it a versatile solution. Operating temperatures -20 - +80°C Operating pressure classes 6bar / 18bar Certificates and classes No specific certifications or classes mentioned
13,00 €16,32 € - 183,04 €229,72 € VAT 0%VAT 25.5%
The hydraulic 2-way ball valve is designed to withstand demanding hydraulic pressure situations and is especially suitable for handling oil. However, this valve is not suitable for use with water, as it is prone to rusting. Its durable construction ensures reliable operation, and the compact design allows for easy installation in a wide range of industrial applications. If you need help choosing the right size or connector, our customer service is ready to help via chat and phone. Applications Hydraulic systems, oil transfer, industrial machinery Industries Industry, engineering, oil and gas industry Benefits The strong construction ensures durability and longevity, while the compact design makes installation and use easy. Chemical and corrosion resistance Not water resistant due to rusting, but excellent for oil-based applications. Sealing Suitable seals: Usit rings. Finding the right size By measuring the outer or inner diameter of the thread with a caliper, you can easily check the correct connector size using the thread table below.
