39,45 €49,51 € VAT 0%VAT 25.5%
This HEL-Performance rear brake hose is the perfect choice for your MZ Mastiff / Baghira 660cc 1998-2007 motorcycle. The hose is designed to improve braking performance and withstand heavy use. The durable nylon coating protects the hose and maintains its performance even in the most demanding conditions.
The hoses are manufactured with meticulous attention to detail and 15 years of experience by a brake hose doctor at Porvoo. So you can rely on the craftsmanship of over 50,000 manufactured hoses with every braking action.
Model designation: MUZ 660 E Seal of approval: H835 Layout: Similar to the original Note: When ordering this product you will receive factory-measured, fully assembled steel braided hoses. If you would like to create custom-measured hoses, you can do so. hereIf you need help choosing the right hose, you can get a quick answer from the brake hose doctor in the chat.
39,45 €49,51 € VAT 0%VAT 25.5%
The HEL-Performance front brake hose is specially designed for the MZ Mastiff / Baghira 660cc 1998-2007 model. This top quality hose offers excellent braking feel and durability in demanding conditions. The nylon coating ensures longevity and protects the hose from wear. Whether you are riding off-road or on the road, this hose provides confidence and precision in braking.
The hoses are manufactured with meticulous attention to detail and 15 years of experience by a brake hose doctor at Porvoo. So you can rely on the craftsmanship of over 50,000 manufactured hoses with every braking action.
Model designation: MUZ 660 E Seal of approval: H835 Layout: Similar to the original Note: When ordering this product you will receive factory-measured, fully assembled steel braided hoses. If you would like to create custom-measured hoses, you can do so. hereIf you need help choosing the right hose, you can get a quick answer from the brake hose doctor in the chat.
40,00 €50,20 € - 138,00 €173,19 € VAT 0%VAT 25.5%
Safety hook automatic with locking for lifting 1.4 ton.
4,78 €6,00 € - 23,00 €28,87 € VAT 0%VAT 25.5%
• Safety factor: 6 x nominal load • Standard: EN 13889 • Hot-dip galvanized • Operating temperature: -40°C – +200°C
3,00 €3,77 € - 5,20 €6,53 € VAT 0%VAT 25.5%
Irtolänget 6000PSI gets on the flange.
0,00 € - 4,82 €6,05 € VAT 0%VAT 25.5%
3000PSI loose hoses can be attached to the flange.
1,00 €1,26 € - 7,00 €8,79 € VAT 0%VAT 25.5%
The SAE flange gasket is specially designed for demanding industrial environments where reliable and durable sealing is required. This O-ring shaped gasket offers excellent pressure resistance and is compatible with a wide range of flanges. Its high-quality material ensures a long service life and reduces the risk of leakage. The SAE flange gasket is the ideal choice when you want to ensure a seamless and effective seal. Applications Hydraulic systems, pipe connections, mechanical engineering, industrial equipment Industries Oil and gas industry, marine industry, chemical industry, automotive industry Benefits The SAE flange gasket offers excellent pressure resistance and long service life, reducing the need for maintenance and improving system reliability. Risks A poorly installed gasket can cause leaks and system failures, which highlights the importance of professional installation. Incorrect material selection can lead to wear caused by chemical agents. Chemical and corrosion resistance The SAE flange gasket is designed to withstand many chemicals used in industry, providing good protection against corrosion. Sealing SAE flange rubber ring seal. Finding the right size By measuring the outer or inner diameter of the thread with a caliper, you can easily check the correct connector size using the thread table below.
0,01 €0,01 € - 30,00 €37,65 € VAT 0%VAT 25.5%
Gear lock belt for fastening 2000/4000dan.
24,00 €30,12 € - 73,85 €92,68 € VAT 0%VAT 25.5%
comply with the requirements of EN 1492-2
0,01 €0,01 € - 58,00 €72,79 € VAT 0%VAT 25.5%
High-quality and durable impact connector between chain and components.
30,03 €37,69 € - 78,00 €97,89 € VAT 0%VAT 25.5%
• Thanks to the design of the bottom of the hook, there is no need to reduce the load capacity of the chain. • Extended hook tip prevents mistakes. • The design of the cleat protects against accidental detachment. • Meets the requirements of prEN1677-7. • Connecting pin and safety pin pre-installed
64,00 €80,32 € - 274,95 €345,06 € VAT 0%VAT 25.5%
Advantages of the joker hook • easy to install, no tools required • the hook can be used to grab the lifting eye or extend the rope • increases the possibilities of using artificial fiber ropes • sturdy locking hook
0,01 €0,01 € - 69,00 €86,60 € VAT 0%VAT 25.5%
• VLBS is forged from strong CrNiMo steel. • Simple and quick to weld. • High dynamic and static strength. • 100% distortion checked. • The welding piece is forged from the very weldable material S355J2+N (Fe52C) and equipped with a marking indicating the maximum load. The patented distance knobs create the air gap needed for welding. • Important: Thanks to the special seam (through-welded), it meets the requirements of DIN 18800. The root portion should be continuously welded. In this way, the root is corrosion-free. • The headset can be used outdoors. • Protected spring keeps the handle in the desired position and silent
0,01 €0,01 € VAT 0%VAT 25.5%
Weldable lifting eye 3.2 ton. • Replaces flame-cut plate lugs • Can be loaded in all directions • Safety factor 4:1 • Rejuvenated and hardened, therefore very wear-resistant • Patented wear marks inside and outside • Rotating small weld
