39,45 €49,51 € VAT 0%VAT 25.5%
The HEL-Performance front brake hose is specially designed for the Rieju MRT 50 SM LC 2023- model. This top quality hose offers excellent braking feel and durability in demanding conditions. The nylon coating ensures longevity and protects the hose from wear. Whether you are riding off-road or on the road, this hose provides confidence and precision in braking.
The hoses are manufactured with meticulous attention to detail and 15 years of experience by a brake hose doctor at Porvoo. So you can rely on the craftsmanship of over 50,000 manufactured hoses with every braking action.
Model designation: Seal of approval: Layout: Similar to the original Note: When ordering this product you will receive factory-measured, fully assembled steel braided hoses. If you would like to create custom-measured hoses, you can do so. hereIf you need help choosing the right hose, you can get a quick answer from the brake hose doctor in the chat.
70,00 €87,85 € VAT 0%VAT 25.5%
Structural adhesive for hard-to-glue plastics such as PE, PP and TPE. Delivery time: 3-5 days
28,00 €35,14 € VAT 0%VAT 25.5%
Two-component steel-filled epoxy adhesive. Can be used to glue several materials such as metals, plastic, ceramics, glass, stone and wood. It is also suitable as glue when the gap in the glue joint is larger. Delivery time: 3-5 days
26,00 €32,63 € VAT 0%VAT 25.5%
Two-component adhesive for manufacturing and installation when there is a need to place pieces to be glued after applying the adhesive. Delivery time: 3-5 days
28,00 €35,14 € VAT 0%VAT 25.5%
Two-component adhesive for quick repair and maintenance work. Delivery time: 3-5 days
60,00 €75,30 € VAT 0%VAT 25.5%
Sturdy manual feeder for D50 Easy-Mix adhesives. Delivery time: 3-5 days
23,00 €28,87 € VAT 0%VAT 25.5%
The mixing tip is suitable for all Easy-Mix glue types (except Metalli and HT 180, which have their own mixing tip) Delivery time: 3-5 days
34,00 €42,67 € VAT 0%VAT 25.5%
Two-component, "non-mixable" structural adhesive (acrylate adhesive). The activator component can be applied to the second surface up to 30 days before the final bonding. During installation, the adhesive component is added to one of the surfaces to be glued. The curing time is about 2-4 minutes. Suitable glue for all metals and many plastics. Glass can also be glued to metal. Applying the hardener and adhesive separately to the opposite surfaces produces the high strength of a 2-component adhesive with the ease of use of a 1-component adhesive. Delivery time: 3-5 days
0,01 €0,01 € - 4,00 €5,02 € VAT 0%VAT 25.5%
The aluminum washer is a durable and high-quality component that is ideal for the demanding needs of industry. Made from high-quality aluminum, this washer provides a reliable and long-lasting solution, especially with bearings and seals. Available in a variety of sizes, aluminum washers offer versatility and flexibility for a variety of applications. Designed for industrial professionals, the product guarantees excellent performance and easy installation. Applications bearings, seals, industrial assemblies Industries manufacturing industry, mechanical engineering, oil and gas industry Benefits Aluminum washers offer excellent wear resistance and a lightweight construction, making them easy to handle and install. They are also corrosion resistant, increasing their service life in demanding environments. Risks The softness of aluminum may limit the use of washers in high-load applications. It is important to ensure that the size and type of washer are appropriate for the application. Chemical and corrosion resistance Aluminum washers are highly resistant to corrosion, but strong acids or bases can cause damage in the long term. Operating temperatures -50 - +150 Operating pressure classes 10 bar / 30 bar Certificates and classes ISO 9001, ISO 14001
1,00 €1,26 € - 11,00 €13,81 € VAT 0%VAT 25.5%
Orfs external thread plug for hydraulic systems. Steel and sturdy connector for all hydraulic systems. This internal thread plug can be used to plug a pressurized hydraulic system. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 228,00 €286,14 € VAT 0%VAT 25.5%
Ords t-branch for hydraulics that can be directed from the side. Steel and sturdy connector for all hydraulic systems. This t connector can be used to split the hydraulic line in two directions. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 19,20 €24,10 € VAT 0%VAT 25.5%
Hydraulic systems orfs reduction connector. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 17,00 €21,34 € VAT 0%VAT 25.5%
Hydraulic systems orfs internal thread cap. Steel and sturdy connector for all hydraulic systems. This can be used to close the pressurized hydraulic line. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 57,00 €71,54 € VAT 0%VAT 25.5%
Hydraulic systems orfs angle nipple external thread internal thread. Steel and sturdy connector for all hydraulic systems. This angle nipple can be used, for example, to align the hose. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 63,00 €79,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 34,00 €42,67 € VAT 0%VAT 25.5%
Orfs internal thread extension nipple for hydraulic systems. Steel and sturdy connector for all hydraulic systems. With this double nipple, hydraulic hoses can be extended or the external thread can be changed to an internal thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 114,00 €143,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple with inch thread. Steel and sturdy connector for all hydraulic systems. With this double nipple, you can start, for example, from a valve table, which usually has an inch thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
