4,78 €6,00 € - 23,00 €28,87 € VAT 0%VAT 25.5%
• Safety factor: 6 x nominal load • Standard: EN 13889 • Hot-dip galvanized • Operating temperature: -40°C – +200°C
1,00 €1,26 € - 11,00 €13,81 € VAT 0%VAT 25.5%
Orfs external thread plug for hydraulic systems. Steel and sturdy connector for all hydraulic systems. This internal thread plug can be used to plug a pressurized hydraulic system. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 228,00 €286,14 € VAT 0%VAT 25.5%
Ords t-branch for hydraulics that can be directed from the side. Steel and sturdy connector for all hydraulic systems. This t connector can be used to split the hydraulic line in two directions. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 19,20 €24,10 € VAT 0%VAT 25.5%
Hydraulic systems orfs reduction connector. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 17,00 €21,34 € VAT 0%VAT 25.5%
Hydraulic systems orfs internal thread cap. Steel and sturdy connector for all hydraulic systems. This can be used to close the pressurized hydraulic line. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 57,00 €71,54 € VAT 0%VAT 25.5%
Hydraulic systems orfs angle nipple external thread internal thread. Steel and sturdy connector for all hydraulic systems. This angle nipple can be used, for example, to align the hose. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 63,00 €79,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 34,00 €42,67 € VAT 0%VAT 25.5%
Orfs internal thread extension nipple for hydraulic systems. Steel and sturdy connector for all hydraulic systems. With this double nipple, hydraulic hoses can be extended or the external thread can be changed to an internal thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 114,00 €143,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple with inch thread. Steel and sturdy connector for all hydraulic systems. With this double nipple, you can start, for example, from a valve table, which usually has an inch thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,59 €0,74 € - 119,00 €149,35 € VAT 0%VAT 25.5%
The HST threaded cap is a blinding cap with an internal thread, made of durable AISI 316 material. This cap is an essential part that helps ensure the functionality of systems in challenging industrial environments. It can help reduce maintenance and replacement needs, which brings significant cost savings in the long run. Applications Industry, buildings, workshops, pipelines. Industries Industry, construction, machine shops, dairies, breweries.. Benefits The HST threaded cap offers excellent durability and reliability, reducing the need for maintenance. Risks Misuse or careless maintenance can damage the product, so proper use and maintenance are important. Chemical resistance Excellent chemical resistance makes the product reliable for industrial needs. Operating temperatures -40 - +120°C Operating pressure classes 5 bar / 15 bar
0,83 €1,04 € - 110,00 €138,05 € VAT 0%VAT 25.5%
The HST cone plug is specifically designed for demanding industrial applications where sealing of hoses and piping is critical. Made from high-quality acid-resistant steel, this cone plug ensures excellent resistance to both pressure and temperature fluctuations. Applications industrial piping, hydraulic systems, pneumatic systems, chemical industry equipment Industries chemical industry, oil and gas industry, food industry, pharmaceutical industry Benefits The HST cone plug offers excellent sealing and durability, increasing system reliability and reducing maintenance costs. Its easy installation and removal saves time and effort. Risks If installed incorrectly, the cone plug can cause leaks and damage the system. It is important to ensure that the cone plug is the correct size and properly tightened. Chemical and corrosion resistance The HST cone plug offers excellent resistance to a wide range of chemicals and corrosion, extending its service life in demanding conditions. Sealing The connector is preferably sealed on the thread with thread sealant, which also lubricates the thread during the fastening phase, preventing it from seizing. Acid-resistant material requires an activator to accompany the thread sealant. Finding the right size By measuring the outer or inner diameter of the thread with a caliper, you can easily check the correct connector size using the thread table below.
3,00 €3,77 € - 29,00 €36,40 € VAT 0%VAT 25.5%
The HST round hat is a high-quality and durable product made of AISI 316 material. The product is available with different sizes of internal thread options, so you can choose the product that suits your needs. Applications The product is perfectly suited for industrial needs, especially for blinding pipes. Industries The product is designed especially for industry, where the purchase, replacement and handling of hoses are daily tasks. Benefits The HST round hat is a durable and reliable choice. As an acid-resistant cap, it is highly resistant to corrosion. Chemical resistance The AISI 316 material guarantees the product's resistance to chemicals, which extends its service life. Operating temperatures The operating temperature of the product is -40 to +120 degrees. Operating pressure classes The working pressure class of the product is 5 bar and the explosion pressure class is 15 bar. Certificates and classes The product meets all industry standards and requirements. Contact us and request an offer for the HST round hat product. Our experts will be happy to help you choose the right product for your needs.
