42,00 €52,71 € VAT 0%VAT 25.5%
Weicon contact VM-250 black instant glue is a high-viscosity, slow-drying, black, rubber-reinforced instant glue. It is intended for gluing natural and synthetic rubber to plastic, or metal/plastic joints. The joint retains its elasticity after drying and withstands shocks well. Temperature duration up to +140 °C. Delivery time: 3-5 days
52,00 €65,26 € VAT 0%VAT 25.5%
Due to the remaining elasticity, WEICON Contact VA 2500 HT is particularly suitable for changing climatic conditions. It is insensitive even to longer exposure to moisture. Contact VA 2500 HT is suitable for gluing various rubber materials and plastics as well as metal/plastic joints. VA 2500 HT can be used in many different industrial areas.
30,00 €37,65 € VAT 0%VAT 25.5%
Weicon CA Activator accelerates the hardening of Weicon cyanoacrylate adhesives. On absorbent surfaces, such as wood or foam or all chemically treated surfaces, such as galvanized metal, etc., the effect of the activator lasts for about a minute. The use of the activator is recommended with the following products: Highly viscous Weicon contact types, high adhesive layer thickness, absorbent and porous surfaces, passive materials (alkaline surfaces, such as zinc-coated metal parts), unfavorable environmental conditions (low temperatures, too low air humidity < 30%). Delivery time: 3-5 days
22,00 €27,61 € VAT 0%VAT 25.5%
Weicon contact VA Gel instant adhesive is a non-draining, slow-setting instant adhesive especially for porous surfaces, large tolerances and vertical surfaces. Suitable for e.g. building miniature models. Delivery time: 3-5 days
31,60 €39,66 € - 154,00 €193,27 € VAT 0%VAT 25.5%
Weicon's CA-primer is a primer intended for polyophenes, which enables the bonding of hard-to-glue plastics such as PP plastic, PE plastic, TPE or PTFE plastics. Primer is applied to both surfaces to be glued, allowed to evaporate for a while, and glued with e.g. Weicon VA 100 quick glue. Delivery time: 3-5 days
16,00 €20,08 € - 52,00 €65,26 € VAT 0%VAT 25.5%
Also suitable with Weico CA-Primer for PE-PP plastics as well as PTFE and silicones. Delivery time: 3-5 days
16,00 €20,08 € - 52,00 €65,26 € VAT 0%VAT 25.5%
Weicon Contact VA 8312 instant glue is a low-viscosity, fast-curing instant glue intended for different rubber materials, e.g. solid rubber and especially APTK and EPDM elastomers. With Weicon CA primer also for PE and PP plastics. Delivery time: 3-5 days
16,00 €20,08 € VAT 0%VAT 25.5%
Weicon Contact VA 1500 is suitable for absorbent and porous materials such as wood, cork, leather and ceramics, and can also be used for gluing metals, rubber and plastic. VA 1500 can be used in many industrial applications.
17,80 €22,34 € - 52,00 €65,26 € VAT 0%VAT 25.5%
Weicon Contact VA 1401 cyanoacrylate is a fast-drying instant glue that can be used to bond metals, plastics and rubber. Instant adhesives dry quickly, reacting to air humidity, gluing surfaces together under compression pressure. Delivery time: 3-5 days
52,80 €66,26 € VAT 0%VAT 25.5%
Weicon Contact VA 110 instant glue is an NSF certified general purpose instant glue that can be used to glue metals, plastic and rubber. Can be used in food industry, drinking water components, pharmaceutical industry. Delivery time: 3-5 days
4,40 €5,52 € - 52,00 €65,26 € VAT 0%VAT 25.5%
Weicon Contact VA 100 is a universal type for bonding metals, plastics and rubber. The VA 100 is ideal for the DIY industry, but it can also be used in many industries. Delivery time: 3-5 days
0,01 €0,01 € - 4,00 €5,02 € VAT 0%VAT 25.5%
The aluminum washer is a durable and high-quality component that is ideal for the demanding needs of industry. Made from high-quality aluminum, this washer provides a reliable and long-lasting solution, especially with bearings and seals. Available in a variety of sizes, aluminum washers offer versatility and flexibility for a variety of applications. Designed for industrial professionals, the product guarantees excellent performance and easy installation. Applications bearings, seals, industrial assemblies Industries manufacturing industry, mechanical engineering, oil and gas industry Benefits Aluminum washers offer excellent wear resistance and a lightweight construction, making them easy to handle and install. They are also corrosion resistant, increasing their service life in demanding environments. Risks The softness of aluminum may limit the use of washers in high-load applications. It is important to ensure that the size and type of washer are appropriate for the application. Chemical and corrosion resistance Aluminum washers are highly resistant to corrosion, but strong acids or bases can cause damage in the long term. Operating temperatures -50 - +150 Operating pressure classes 10 bar / 30 bar Certificates and classes ISO 9001, ISO 14001
1,00 €1,26 € - 7,00 €8,79 € VAT 0%VAT 25.5%
The threaded reducing fitting is a versatile and durable solution for industrial applications where a reduced thread is required. Made from high-quality brass, this fitting is ideal for handling compressed air, water and fuels. Its design allows for easy installation and reliable use in demanding conditions. This makes it an ideal choice for industrial professionals looking for an efficient and long-lasting fitting. Applications Compressed air, water, fuels Industries Industry, marine industry, engineering industry Benefits The threaded reduction fitting offers a reliable seal and a durable construction that reduces maintenance requirements. It is designed for long service life. Risks If installed incorrectly, the connector can cause leaks or pressure loss. It is important to ensure that the connector is installed correctly and is suitable for the application being used. Hoses Compatible with various compressed air and fuel hoses Chemical resistance The brass construction offers good resistance to many chemicals, but it is recommended to check compatibility individually. Operating temperatures -20 - +120°C Operating pressure classes 10bar / 25bar Certificates and classes No certificates mentioned
1,30 €1,63 € - 3,00 €3,77 € VAT 0%VAT 25.5%
The threaded coupling is a premium low-pressure coupling with inch threads, designed specifically for industrial applications. Its durable material makes it an excellent choice for handling compressed air, fuels and water. This versatile coupling provides a reliable connection that can withstand even the most demanding conditions. The threaded coupling is easy to install and guarantees long-lasting performance. Applications Compressed air, fuels, water Industries Industry, engineering workshops, energy industry Benefits The threaded coupling provides a reliable connection and durable performance in a variety of industrial applications. It is easy to install and requires little maintenance. Risks If installed incorrectly, a threaded sleeve can cause leaks and reduce the functionality of the system. It is important to ensure proper installation and regular inspection. Hoses Compatible with most standard threaded hoses Chemical resistance The threaded sleeve is highly resistant to most common industrial chemicals, making it a versatile solution. Operating temperatures -20 - +80°C Operating pressure classes 6bar / 18bar Certificates and classes No specific certifications or classes mentioned
1,00 €1,26 € - 6,00 €7,53 € VAT 0%VAT 25.5%
The threaded coupling is a premium low-pressure coupling with inch threads, designed specifically for industrial applications. Its durable material makes it an excellent choice for handling compressed air, fuels and water. This versatile coupling provides a reliable connection that can withstand even the most demanding conditions. The threaded coupling is easy to install and guarantees long-lasting performance. Applications Compressed air, fuels, water Industries Industry, engineering workshops, energy industry Benefits The threaded coupling provides a reliable connection and durable performance in a variety of industrial applications. It is easy to install and requires little maintenance. Risks If installed incorrectly, a threaded sleeve can cause leaks and reduce the functionality of the system. It is important to ensure proper installation and regular inspection. Hoses Compatible with most standard threaded hoses Chemical resistance The threaded sleeve is highly resistant to most common industrial chemicals, making it a versatile solution. Operating temperatures -20 - +80°C Operating pressure classes 6bar / 18bar Certificates and classes No specific certifications or classes mentioned
