0,00 € - 154,44 €193,82 € VAT 0%VAT 25.5%
Strong hydraulic 3-way ball valve. The valve is rated for hydraulic pressures and oil. Not suitable for water due to rusting. Drilling in valve L. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone.
4,00 €5,02 € - 10,00 €12,55 € VAT 0%VAT 25.5%
A compressible hose connector used in the pressure hose of the pressure gauge. This connector fits Kränzle and Kärcher pressure washers.
0,01 €0,01 € - 51,00 €64,01 € VAT 0%VAT 25.5%
Top quality acid-resistant pressure gauge with a 63mm face plate.
0,00 € - 25,00 €31,38 € VAT 0%VAT 25.5%
Top quality acid-resistant pressure gauge with a 63mm face plate.
94,00 €117,97 € - 158,00 €198,29 € VAT 0%VAT 25.5%
Top quality acid-resistant pressure gauge with a 100mm faceplate.
1,00 €1,26 € - 11,00 €13,81 € VAT 0%VAT 25.5%
Orfs external thread plug for hydraulic systems. Steel and sturdy connector for all hydraulic systems. This internal thread plug can be used to plug a pressurized hydraulic system. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 228,00 €286,14 € VAT 0%VAT 25.5%
Ords t-branch for hydraulics that can be directed from the side. Steel and sturdy connector for all hydraulic systems. This t connector can be used to split the hydraulic line in two directions. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 19,20 €24,10 € VAT 0%VAT 25.5%
Hydraulic systems orfs reduction connector. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 17,00 €21,34 € VAT 0%VAT 25.5%
Hydraulic systems orfs internal thread cap. Steel and sturdy connector for all hydraulic systems. This can be used to close the pressurized hydraulic line. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
3,00 €3,77 € - 73,00 €91,62 € VAT 0%VAT 25.5%
Hydraulics systems ORFS 90 degree elbow hose connector with internal thread. Steel and sturdy connector for all hydraulic hose assemblies. These connectors have a UN thread level with sealing. This connector requires a 90 Shore o-ring all the way to the outer thread of the connector. The o-ring in question should be replaced every time the connector needs to be replaced. Due to its structure, the connector is easy to thread. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. The thread table of orfs connectors below shows the exact thread of the un connector.
2,00 €2,51 € - 29,00 €36,40 € VAT 0%VAT 25.5%
ORFS hose connector for hydraulic systems with internal thread. Steel and sturdy connector for all hydraulic hose assemblies. These connectors have a UN thread level with sealing. This connector requires a 90 Shore o-ring all the way to the outer thread of the connector. The o-ring in question should be replaced every time the connector needs to be replaced. Due to its structure, the connector is easy to thread. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. The thread table of orfs connectors below shows the exact thread of the un connector.
4,00 €5,02 € - 110,00 €138,05 € VAT 0%VAT 25.5%
Hydraulic systems ORFS 45 degree hose connector with internal thread. Steel and sturdy connector for all hydraulic hose assemblies. These connectors have a UN thread level with sealing. This connector requires a 90 Shore o-ring all the way to the outer thread of the connector. The o-ring in question should be replaced every time the connector needs to be replaced. Due to its structure, the connector is easy to thread. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. The thread table of orfs connectors below shows the exact thread of the un connector.
2,00 €2,51 € - 110,00 €138,05 € VAT 0%VAT 25.5%
Hydraulics systems ORFS 90 degree elbow hose connector with internal thread. Steel and sturdy connector for all hydraulic hose assemblies. These connectors have a UN thread level with sealing. This connector requires a 90 Shore o-ring all the way to the outer thread of the connector. The o-ring in question should be replaced every time the connector needs to be replaced. Due to its structure, the connector is easy to thread. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. The thread table of orfs connectors below shows the exact thread of the un connector.
46,00 €57,73 € - 143,00 €179,47 € VAT 0%VAT 25.5%
ORFS feed-through connector with external threads for hydraulics.
0,00 € - 57,00 €71,54 € VAT 0%VAT 25.5%
Hydraulic systems orfs angle nipple external thread internal thread. Steel and sturdy connector for all hydraulic systems. This angle nipple can be used, for example, to align the hose. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 63,00 €79,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple. Steel and sturdy connector for all hydraulic systems. This double nipple can be used to extend the hydraulic hoses or change the size. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
0,00 € - 34,00 €42,67 € VAT 0%VAT 25.5%
Orfs internal thread extension nipple for hydraulic systems. Steel and sturdy connector for all hydraulic systems. With this double nipple, hydraulic hoses can be extended or the external thread can be changed to an internal thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
2,00 €2,51 € - 114,00 €143,07 € VAT 0%VAT 25.5%
Hydraulic systems orfs external thread double nipple with inch thread. Steel and sturdy connector for all hydraulic systems. With this double nipple, you can start, for example, from a valve table, which usually has an inch thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
1,83 €2,30 € - 52,00 €65,26 € VAT 0%VAT 25.5%
Hydraulic hose connector NPT external thread cone.