74,00 €92,87 € - 2170,00 €2723,35 € VAT 0%VAT 25.5%
A putty-like, mineral-filled, wear-resistant artificial metal that is suitable for e.g. for repairs in conveyors, guide rails and sliding surfaces where rolling or sliding causes wear. The product is also used for coating in pump housings and presses and for repairing worn flanges. Delivery time: 3-5 days
84,00 €105,42 € - 267,00 €335,09 € VAT 0%VAT 25.5%
A liquid, steel-filled and wear-resistant synthetic metal that is suitable for e.g. for axle repairs, chain conveyor chain base repairs, and casting models. Delivery time: 3-5 days
65,00 €81,58 € VAT 0%VAT 25.5%
A putty-like, steel-filled, fast-drying artificial metal, which is suitable for quick repairs and gluing, e.g. for leaking pipes, roller coating, pump housings and gearboxes, as well as fixing anchors and equipment fixings. Delivery time: 3-5 days
65,00 €81,58 € - 250,00 €313,75 € VAT 0%VAT 25.5%
A putty-like, aluminum-filled artificial metal, which is suitable for filling the pores of aluminum parts and parts to be repaired in areas where high heat resistance is not required. Delivery time: 3-5 days
65,00 €81,58 € - 250,00 €313,75 € VAT 0%VAT 25.5%
A putty-like, aluminum-filled artificial metal, which is suitable for filling the pores of aluminum parts and parts to be repaired in areas where high heat resistance is not required. Delivery time: 3-5 days
82,00 €102,91 € - 267,00 €335,09 € VAT 0%VAT 25.5%
Liquid, aluminum-filled synthetic metal. No corrosion, antimagnetic, hardens without shrinking. Suitable for repairing molds, fixing equipment and making tools. Max + 220 ° C for temperatures. Delivery time: 3-5 days
65,00 €81,58 € VAT 0%VAT 25.5%
A liquid, steel-filled chemical metal suitable for the production of molds, models, measuring instruments and fasteners. Can also be used to repair pores and hairline cracks in castings. Delivery time: 3-5 days
65,00 €81,58 € - 250,00 €313,75 € VAT 0%VAT 25.5%
A putty-like, steel-filled chemical metal that is particularly suitable for preventing corrosion damage. Used for repairs in pipelines and castings, pump housings and machine parts. DNV GL certified. Can also be used in the manufacture of molds, models and fasteners. The product is approved for use on ships and can be found in the IMPA catalog. IMPA Code 81 29 01/02 Delivery time: 3-5 days
42,00 €52,71 € VAT 0%VAT 25.5%
Weicon contact VM-250 black instant glue is a high-viscosity, slow-drying, black, rubber-reinforced instant glue. It is intended for gluing natural and synthetic rubber to plastic, or metal/plastic joints. The joint retains its elasticity after drying and withstands shocks well. Temperature duration up to +140 °C. Delivery time: 3-5 days
52,00 €65,26 € VAT 0%VAT 25.5%
Due to the remaining elasticity, WEICON Contact VA 2500 HT is particularly suitable for changing climatic conditions. It is insensitive even to longer exposure to moisture. Contact VA 2500 HT is suitable for gluing various rubber materials and plastics as well as metal/plastic joints. VA 2500 HT can be used in many different industrial areas.
30,00 €37,65 € VAT 0%VAT 25.5%
Weicon CA Activator accelerates the hardening of Weicon cyanoacrylate adhesives. On absorbent surfaces, such as wood or foam or all chemically treated surfaces, such as galvanized metal, etc., the effect of the activator lasts for about a minute. The use of the activator is recommended with the following products: Highly viscous Weicon contact types, high adhesive layer thickness, absorbent and porous surfaces, passive materials (alkaline surfaces, such as zinc-coated metal parts), unfavorable environmental conditions (low temperatures, too low air humidity < 30%). Delivery time: 3-5 days
22,00 €27,61 € VAT 0%VAT 25.5%
Weicon contact VA Gel instant adhesive is a non-draining, slow-setting instant adhesive especially for porous surfaces, large tolerances and vertical surfaces. Suitable for e.g. building miniature models. Delivery time: 3-5 days
31,60 €39,66 € - 154,00 €193,27 € VAT 0%VAT 25.5%
Weicon's CA-primer is a primer intended for polyophenes, which enables the bonding of hard-to-glue plastics such as PP plastic, PE plastic, TPE or PTFE plastics. Primer is applied to both surfaces to be glued, allowed to evaporate for a while, and glued with e.g. Weicon VA 100 quick glue. Delivery time: 3-5 days
16,00 €20,08 € - 52,80 €66,26 € VAT 0%VAT 25.5%
Also suitable with Weico CA-Primer for PE-PP plastics as well as PTFE and silicones. Delivery time: 3-5 days
16,00 €20,08 € - 52,80 €66,26 € VAT 0%VAT 25.5%
Weicon Contact VA 8312 instant glue is a low-viscosity, fast-curing instant glue intended for different rubber materials, e.g. solid rubber and especially APTK and EPDM elastomers. With Weicon CA primer also for PE and PP plastics. Delivery time: 3-5 days
16,00 €20,08 € VAT 0%VAT 25.5%
Weicon Contact VA 1500 is suitable for absorbent and porous materials such as wood, cork, leather and ceramics, and can also be used for gluing metals, rubber and plastic. VA 1500 can be used in many industrial applications.
17,80 €22,34 € - 52,80 €66,26 € VAT 0%VAT 25.5%
Weicon Contact VA 1401 cyanoacrylate is a fast-drying instant glue that can be used to bond metals, plastics and rubber. Instant adhesives dry quickly, reacting to air humidity, gluing surfaces together under compression pressure. Delivery time: 3-5 days
52,80 €66,26 € VAT 0%VAT 25.5%
Weicon Contact VA 110 instant glue is an NSF certified general purpose instant glue that can be used to glue metals, plastic and rubber. Can be used in food industry, drinking water components, pharmaceutical industry. Delivery time: 3-5 days
4,40 €5,52 € - 52,80 €66,26 € VAT 0%VAT 25.5%
Weicon Contact VA 100 is a universal type for bonding metals, plastics and rubber. The VA 100 is ideal for the DIY industry, but it can also be used in many industries. Delivery time: 3-5 days
21,80 €27,36 € - 120,00 €150,60 € VAT 0%VAT 25.5%
The curing time can be significantly shortened by pretreatment with WEICONLOCK Activator F. The actuator is recommended for all passive surfaces and is essential in low ambient temperatures (below +10°C / +50°F) and in large gaps. On non-metallic surfaces, WEICONLOCK can only harden completely when an activator is used. Delivery time 3-5 days