113,40 €142,32 € VAT 0%VAT 25.5%
Buy HEL Performance's exceptional braided brake hose for the Simca 1000 Rallye (1972). These brake hoses are designed to replace the original rubber hoses, improve braking feel and increase durability even in demanding conditions. All parts of the hose set are manufactured and machined internally from stainless steel, ensuring quality and easy installation.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
40,00 €50,20 € - 138,00 €173,19 € VAT 0%VAT 25.5%
Safety hook automatic with locking for lifting 1.4 ton.
4,78 €6,00 € - 23,00 €28,87 € VAT 0%VAT 25.5%
• Safety factor: 6 x nominal load • Standard: EN 13889 • Hot-dip galvanized • Operating temperature: -40°C – +200°C
0,01 €0,01 € - 30,00 €37,65 € VAT 0%VAT 25.5%
Gear lock belt for fastening 2000/4000dan.
24,00 €30,12 € - 73,85 €92,68 € VAT 0%VAT 25.5%
comply with the requirements of EN 1492-2
0,01 €0,01 € - 58,00 €72,79 € VAT 0%VAT 25.5%
High-quality and durable impact connector between chain and components.
30,03 €37,69 € - 78,00 €97,89 € VAT 0%VAT 25.5%
• Thanks to the design of the bottom of the hook, there is no need to reduce the load capacity of the chain. • Extended hook tip prevents mistakes. • The design of the cleat protects against accidental detachment. • Meets the requirements of prEN1677-7. • Connecting pin and safety pin pre-installed
64,00 €80,32 € - 274,95 €345,06 € VAT 0%VAT 25.5%
Advantages of the joker hook • easy to install, no tools required • the hook can be used to grab the lifting eye or extend the rope • increases the possibilities of using artificial fiber ropes • sturdy locking hook
2,26 €2,84 € - 28,00 €35,14 € VAT 0%VAT 25.5%
HST weldable male thread nipple is a high quality, acid-resistant component made of AISI 316 steel. This product offers excellent resistance to dissolving and corrosive chemicals. The nipple is designed specifically for industrial needs where long-lasting and reliable solutions are required. It is easy to install and suitable for versatile use in various industrial applications. Applications Chemical industry, industrial equipment manufacturing, process industry. Industries Chemical industry, oil and gas industry, metal industry. Benefits The product's advantages are its reliability and durability in extreme conditions, reducing the need for maintenance and replacement. Chemical and corrosion resistance The nipple is designed to withstand the effects of dissolving and corrosive chemicals, providing long-term protection against corrosion. Sealing The connector is preferably sealed on the thread with thread sealant, which also lubricates the thread during the fastening phase, preventing it from seizing. Acid-resistant material requires an activator to accompany the thread sealant. Finding the right size By measuring the outer or inner diameter of the thread with a caliper, you can easily check the correct connector size using the thread table below.
0,01 €0,01 € - 69,00 €86,60 € VAT 0%VAT 25.5%
• VLBS is forged from strong CrNiMo steel. • Simple and quick to weld. • High dynamic and static strength. • 100% distortion checked. • The welding piece is forged from the very weldable material S355J2+N (Fe52C) and equipped with a marking indicating the maximum load. The patented distance knobs create the air gap needed for welding. • Important: Thanks to the special seam (through-welded), it meets the requirements of DIN 18800. The root portion should be continuously welded. In this way, the root is corrosion-free. • The headset can be used outdoors. • Protected spring keeps the handle in the desired position and silent
0,01 €0,01 € VAT 0%VAT 25.5%
Weldable lifting eye 3.2 ton. • Replaces flame-cut plate lugs • Can be loaded in all directions • Safety factor 4:1 • Rejuvenated and hardened, therefore very wear-resistant • Patented wear marks inside and outside • Rotating small weld
