2,00 €2,51 € VAT 0%VAT 25.5%
Steel braid Brake hose compression connector acid-resistant 48.3mm.
16,67 €20,92 € VAT 0%VAT 25.5%
SP-203 Body Only for BMW Threaded M6 Hole
40,00 €50,20 € - 138,00 €173,19 € VAT 0%VAT 25.5%
Safety hook automatic with locking for lifting 1.4 ton.
1,37 €1,72 € VAT 0%VAT 25.5%
SP-202 / SP-203 BRACKET WITH M6 THREAD
1,34 €1,68 € VAT 0%VAT 25.5%
Brake hose connector inner part with M10x1.00 thread.
4,78 €6,00 € - 23,00 €28,87 € VAT 0%VAT 25.5%
• Safety factor: 6 x nominal load • Standard: EN 13889 • Hot-dip galvanized • Operating temperature: -40°C – +200°C
0,01 €0,01 € - 30,00 €37,65 € VAT 0%VAT 25.5%
Gear lock belt for fastening 2000/4000dan.
24,00 €30,12 € - 73,85 €92,68 € VAT 0%VAT 25.5%
comply with the requirements of EN 1492-2
0,01 €0,01 € - 58,00 €72,79 € VAT 0%VAT 25.5%
High-quality and durable impact connector between chain and components.
30,03 €37,69 € - 78,00 €97,89 € VAT 0%VAT 25.5%
• Thanks to the design of the bottom of the hook, there is no need to reduce the load capacity of the chain. • Extended hook tip prevents mistakes. • The design of the cleat protects against accidental detachment. • Meets the requirements of prEN1677-7. • Connecting pin and safety pin pre-installed
64,00 €80,32 € - 274,95 €345,06 € VAT 0%VAT 25.5%
Advantages of the joker hook • easy to install, no tools required • the hook can be used to grab the lifting eye or extend the rope • increases the possibilities of using artificial fiber ropes • sturdy locking hook
0,01 €0,01 € - 69,00 €86,60 € VAT 0%VAT 25.5%
• VLBS is forged from strong CrNiMo steel. • Simple and quick to weld. • High dynamic and static strength. • 100% distortion checked. • The welding piece is forged from the very weldable material S355J2+N (Fe52C) and equipped with a marking indicating the maximum load. The patented distance knobs create the air gap needed for welding. • Important: Thanks to the special seam (through-welded), it meets the requirements of DIN 18800. The root portion should be continuously welded. In this way, the root is corrosion-free. • The headset can be used outdoors. • Protected spring keeps the handle in the desired position and silent
0,01 €0,01 € VAT 0%VAT 25.5%
Weldable lifting eye 3.2 ton. • Replaces flame-cut plate lugs • Can be loaded in all directions • Safety factor 4:1 • Rejuvenated and hardened, therefore very wear-resistant • Patented wear marks inside and outside • Rotating small weld
2,44 €3,06 € VAT 0%VAT 25.5%
HEL XPF MITSUBISHI/VAG CLUTCH PUSH FITTING
0,01 €0,01 € VAT 0%VAT 25.5%
Welcome to learn about a durable and safe solution for your vehicle's brake system! With us you will find exactly what you are looking for - a brake hose made of stainless steel braid with a t-connector. This high quality t connector provides a reliable and serious connection between the Brake Hose and your vehicle's braking system. Its easy and safe bracket enables effortless installation in the brake system. With the help of the T-connector, the brake pressure is transmitted to the brake hose very smoothly and efficiently, which improves the performance and safety of the brake system even more. By choosing a brake hose made of stainless steel braid with a t-connector bracket, you can be sure that your brake system will always work reliably and safely. Our products are designed to withstand extremely demanding conditions and ensure the best possible performance of your vehicle's braking system
