113,40 €142,32 € VAT 0%VAT 25.5%
Buy HEL Performance's exceptional braided brake hose for the Marcos 1.6 GT. These brake hoses are designed to replace the original rubber hoses, improve braking feel and increase durability even in demanding conditions. All parts of the hose set are manufactured and machined internally from stainless steel, ensuring quality and easy installation.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
113,40 €142,32 € VAT 0%VAT 25.5%
Buy HEL Performance's exceptional braided brake hose for the Marcos3 model. These brake hoses are designed to replace the original rubber hoses, improve braking feel and increase durability even in demanding conditions. All parts of the hose set are manufactured and machined internally from stainless steel, ensuring quality and easy installation.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
113,40 €142,32 € VAT 0%VAT 25.5%
Buy HEL Performance's exceptional braided brake hose for the Marcos2 model. These brake hoses are designed to replace the original rubber hoses, improve braking feel and increase durability even in demanding conditions. All parts of the hose set are manufactured and machined internally from stainless steel, ensuring quality and easy installation.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
Don't take the risk of using inferior brake hoses when you can rely on reliable and performance-enhancing brake hoses manufactured by the official distributor of HEL Performance, which are handcrafted in Porvoo. Most competitors use galvanized fittings that are susceptible to corrosion - our hoses and fittings are always made of stainless steel, which are durable. Our brake hose master has manufactured tens of thousands of brake hoses over the years, so you can always drive your car with confidence that your brake hoses are of high quality. This set contains a total of 4 hoses, so for only 113.4 euros you are guaranteed to get value for your money.
136,00 €170,68 € - 276,00 €346,38 € VAT 0%VAT 25.5%
Hydraulics systems ORFS 90 degree elbow hose connector with internal thread. Steel and sturdy connector for all hydraulic hose assemblies. These connectors have a UN thread level with sealing. This connector requires a 90 Shore o-ring all the way to the outer thread of the connector. The o-ring in question should be replaced every time the connector needs to be replaced. Due to its structure, the connector is easy to thread. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. The thread table of orfs connectors below shows the exact thread of the un connector.
80,00 €100,40 € - 414,00 €519,57 € VAT 0%VAT 25.5%
Hydraulic systems ORFS 45 degree hose connector with internal thread. Steel and sturdy connector for all hydraulic hose assemblies. These connectors have a UN thread level with sealing. This connector requires a 90 Shore o-ring all the way to the outer thread of the connector. The o-ring in question should be replaced every time the connector needs to be replaced. Due to its structure, the connector is easy to thread. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. The thread table of orfs connectors below shows the exact thread of the un connector.
Request an offer
Hydraulic systems orfs internal thread cap. Steel and sturdy connector for all hydraulic systems. This can be used to close the pressurized hydraulic line. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
Request an offer
Hydraulic systems orfs external thread double nipple with inch thread. Steel and sturdy connector for all hydraulic systems. With this double nipple, you can use, for example, a valve table, which usually has an inch thread. This connector series always requires a 90 Shore o-ring for the UN external thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
Request an offer
Hydraulic systems orfs external thread double nipple with inch thread. Steel and sturdy connector for all hydraulic systems. With this double nipple, you can start, for example, from a valve table, which usually has an inch thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
Request an offer
Hydraulic systems orfs external thread double nipple with inch thread. Steel and sturdy connector for all hydraulic systems. With this double nipple, you can start, for example, from a valve table, which usually has an inch thread. This connector series always requires a 90 Shore o-ring for the UN outer thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
Request an offer
Orfs feed-through nipple for hydraulic systems. Steel and sturdy connector for all hydraulic systems. This nipple can be used to make feed-through connections to sheet metal and other plates. This connector series always requires a 90 Shore O-ring for the UN external thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
Request an offer
Hydraulic systems orfs internal thread double nipple with inch external thread. Steel and sturdy connector for all hydraulic systems. With this double nipple, a BSP thread can be changed to a UN thread. . This connector series always requires a 90 Shore o-ring for the UN external thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
Request an offer
Hydraulic ords t-branch that can be directed from the center. Steel and sturdy connector for all hydraulic systems. This t connector can be used to split the hydraulic line in two directions. This connector series always requires a 90 Shore o-ring for the UN external thread, which should be replaced whenever the connector is changed. This nipple is available in many different sizes. If choosing the right size or connector causes difficulties, we will help you quickly in the chat and by phone. From the thread table below, you can use a caliper to ensure the correct connector size.
