66,14 €83,01 € VAT 0%VAT 25.5%
Buy HEL Performance's exceptionally high-quality clutch hose (from the bleeder valve to the accumulator) for the Volkswagen Golf MK5 (2004-2010) model. Don't take the risk of using poor-quality clutch hoses when you can rely on the reliability and performance-enhancing clutch hoses manufactured by the official HEL Performance importer, which are handcrafted in Porvoo. Our brake hose master has manufactured tens of thousands of clutch and brake hoses over the years, so you can drive your car always confident that your hoses will not fail while driving. This set contains a total of 1 hose, so for only 66.14 euros you are guaranteed to get value for your money.
40,00 €50,20 € - 138,00 €173,19 € VAT 0%VAT 25.5%
Safety hook automatic with locking for lifting 1.4 ton.
4,78 €6,00 € - 23,00 €28,87 € VAT 0%VAT 25.5%
• Safety factor: 6 x nominal load • Standard: EN 13889 • Hot-dip galvanized • Operating temperature: -40°C – +200°C
0,01 €0,01 € - 30,00 €37,65 € VAT 0%VAT 25.5%
Gear lock belt for fastening 2000/4000dan.
24,00 €30,12 € - 73,85 €92,68 € VAT 0%VAT 25.5%
comply with the requirements of EN 1492-2
0,01 €0,01 € - 58,00 €72,79 € VAT 0%VAT 25.5%
High-quality and durable impact connector between chain and components.
30,03 €37,69 € - 78,00 €97,89 € VAT 0%VAT 25.5%
• Thanks to the design of the bottom of the hook, there is no need to reduce the load capacity of the chain. • Extended hook tip prevents mistakes. • The design of the cleat protects against accidental detachment. • Meets the requirements of prEN1677-7. • Connecting pin and safety pin pre-installed
64,00 €80,32 € - 274,95 €345,06 € VAT 0%VAT 25.5%
Advantages of the joker hook • easy to install, no tools required • the hook can be used to grab the lifting eye or extend the rope • increases the possibilities of using artificial fiber ropes • sturdy locking hook
0,01 €0,01 € - 69,00 €86,60 € VAT 0%VAT 25.5%
• VLBS is forged from strong CrNiMo steel. • Simple and quick to weld. • High dynamic and static strength. • 100% distortion checked. • The welding piece is forged from the very weldable material S355J2+N (Fe52C) and equipped with a marking indicating the maximum load. The patented distance knobs create the air gap needed for welding. • Important: Thanks to the special seam (through-welded), it meets the requirements of DIN 18800. The root portion should be continuously welded. In this way, the root is corrosion-free. • The headset can be used outdoors. • Protected spring keeps the handle in the desired position and silent
0,01 €0,01 € VAT 0%VAT 25.5%
Weldable lifting eye 3.2 ton. • Replaces flame-cut plate lugs • Can be loaded in all directions • Safety factor 4:1 • Rejuvenated and hardened, therefore very wear-resistant • Patented wear marks inside and outside • Rotating small weld
